Models > IMS100

IMS100 (7X28A) Maytag Ice Maker - Overview

Get Parts and Repair Help for IMS100

If you know the ice maker repair part you need, you can browse the list of all parts on the IMS100, or you can search by name or part description. You can also find your part by where it is located on the IMS100 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your ice maker. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Exact Part matches for your search term [Viewing 1 of 1]

Complete Ice Maker Kit

This part number matches the current model number "IMS100".

This heat release ice maker kit comes with a water inlet valve, an ice bin, the icemaker, and all the related hardware. This ice maker kit forms crescent shaped ice cubes, and is intended for use with refrigerators that have been manufactured since 1989/1990.

Sections of the IMS100 [Viewing 1 of 1]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.70

Screw

This screw is sold individually.

Order within the next 8 hrs and your part ships today!
$4.64

Screw

Sold individually.

Order within the next 8 hrs and your part ships today!
$2.07

Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.

Order within the next 8 hrs and your part ships today!
$28.68

Single Outlet Water Valve Kit

The water inlet valve is a solenoid-operated switch located at the bottom of the refrigerator. When it is energized by electrical power, water is released from the supply line through the water valve and into the compact icemaker mold. ***Please NOTE: This part has been redesigned and may appear different than the original. It has a new quick connection. To install: cut the retaining nut off the existing water line and gently push into new valve. To remove: depress the ring that the tube slides into.

Order within the next 8 hrs and your part ships today!
$4.70

Compression Nut

This compression nut is used with the plastic water line of the icemaker assembly.

Order within the next 8 hrs and your part ships today!
$2.70

SCREW

This screw is sold individually.

Order within the next 8 hrs and your part ships today!
$7.96

Plastic Tubing

1/4" Plastic tubing, 8 1/2 feet long.

Order within the next 8 hrs and your part ships today!
$2.70

Screw

This is screw is sold individually.

Order within the next 8 hrs and your part ships today!
$4.19

Inlet Hose Gasket

This high pressure inlet hose washer is black. It is an inch in diameter, made of rubber, and used with many washing machines, refrigerators, and dishwashers.

Order within the next 8 hrs and your part ships today!
$11.60

TRAY

This tray is a replacement part for flex tray ice makers.

Order within the next 8 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

no water getting to ice maker

  • Customer: Kevin from Boston MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers, Wrench(Adjustable)
  • 40 of 48 people found this instruction helpful
The ice maker had been slowly dying and one day just stopped making ice. No water was getting to the trays.

I read that this could be caused by a failure of the valve, even though the continuity test indicated that the solenoid was okay.

I ordered the part Friday afternoon. It was delivered Saturday. I did the repair in 10 minutes.
read more

Water valve failed, flooded kitchen

  • Customer: James R from Valley Springs CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Wrench(Adjustable)
  • 8 of 9 people found this instruction helpful
Turned off water supply and unplugged appliance. Removed lower panel on back of refrigerator with 1/4 " nutdriver. Then removed supply line, and line to icemaker. removed valve from back panel and replaced with new valve. wrapped water connections with teflon tape, turned on supply line, checked for leaks, everything o.k..Replaced back panel and in 45 minute... read more

The old ice maker was leaking water when it filled freezing the ice in the accumulation tray into one big lump.

  • Customer: Robert from Franklin TN
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 5 of 6 people found this instruction helpful
First, I read the instructions that came with the replacement ice maker, which I found confusing because they were apparently written to be installed in some other make of refrigerator. However, after removing the white plastic cover on the new unit and insuring that it was identical to the one that came with the refrigerator, I removed the old unit by first... read more