Quick Question!

Have you ever purchased from PartSelect.com before?

Models > IM115 > Parts

IM115 Uni Ice Maker - Parts

All parts for the Uni Ice Maker IM115

Below is a list of all parts for the Uni Ice Maker IM115. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the IM115
1-14 of 46
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$97.61

Ice Maker with Cover - 8 Cube

This Frigidaire ice maker includes the ice mold and control device. The ice maker receives water from the water inlet valve and stores water in the ice mold until it freezes. Ice i...

$21.76

Water Inlet Valve

If you notice that the ice maker in your refrigerator is leaking or is not making or dispensing ice, you may need to replace the water inlet valve. When energized, the water inlet valve releases water from the supply line into the ice mold. The water inlet valve is in the back of your refrigerator so you will need to pull the fridge out from the wall before completing this repair. To complete this job, you will need a 1/2 inch wrench, a 1/4 inch nut driver and a utility knife. If your old inlet valve has a screw-in fitting, you may need to simply cut the end of the hose to fit in the new part. Be sure to disconnect both the water and power supply from the refrigerator prior to beginning this repair.

$103.77

Replacement Ice Maker

This replacement icemaker may also be known as the ice maker assembly and is compatible with your refrigerator/freezer. This assembly replaces the heat-release ice maker unit only....

$8.82

GEAR

The ejector drive gear is a part for your refrigerator. This icemaker drive gear is for the ejector blades. The part rotates the cube ejector arm, which cycles the icemaker and pushes the cubes out and into the ice bucket, ready for the ice to be used. The outside diameter of this piece is almost two inches by two inches. The reason for needing to replace your gear is if the current one is broken/missing a tooth, or if your icemaker is not dispensing ice and is noisy.

$7.48

TUBE-WATER FILL

This is a water fill tube which is used in refrigerators. It attaches to the water inlet valve and supplies water to the components in your appliance that need it, such as the icem...

$44.71

Ice Container

The ice bin, located in a freezer, is a storage container used for storing ice. Ice cubes collect there after they are made. If your bin is cracked or damaged, it is best to replace this part. To repair, first open your freezer door and dump any leftover ice residing in bin before removing it. Next, release ice bin from assembly by releasing the locking tabs. With a flathead screwdriver, flex the tabs inwards on each side. Make sure to bend them enough to unlock and pull assembly from the ice bucket. Line up the new ice bin with assembly before installing it. Refer to the manual provided by the manufacturer for further installation instructions.

$6.02

ICE STRIPPER

The ice stripper goes on the front of the ice maker and directs the ice cubes from the maker to the bin. Due to the frigid temperatures, the plastic breaks down and cracks from tim...

$37.58

Water Inlet Tube

This water inlet tube is designed for use in your refrigerator. This part supplies water to refrigerator components that require water, such as the ice maker and water dispenser. The water inlet tube connects the water inlet valve to the icemaker and water dispenser. If you notice that your icemaker is not making ice, your water dispenser is not working, or your refrigerator is leaking, you may need to replace the water inlet tube. This part is made of plastic and is blue-green in color, with white plastic tips. This part is sold individually. Be sure to disconnect the water source to the refrigerator before you begin this repair.

$8.43

Clip

This white clip is an inch long.

$42.27

Micro Switch

The micro switch in your refrigerator aids in the dispensing of ice and water. This micro switch controls the on/off function of the ice/water dispenser of your refrigerator. If you notice that your refrigerator is not dispensing ice or water properly, you may need to replace your micro switch. This part is made of black plastic, with three metal prongs. The plastic portion of this part is approximately one inch in length. This is an OEM part sourced directly from the manufacturer. Be sure to unplug your refrigerator from the power source before you begin this repair.

$6.96

Shutoff Arm Spring

This genuine replacement shutoff arm spring is for refrigerator ice makers. It applies tension to the ice maker shutoff arm to hold it in place so that the ice maker will stop maki...

$6.03

SCREW

$27.19

Icemaker Thermal Cut-Off

This part is a one-time limit fuse used as a safety device. Once tripped, this part must be replaced.

$26.87

EJECTOR-ICE

All Parts for the IM115
1-14 of 46