Quick Question!

Have you ever purchased from PartSelect.com before?

Models > ICR410RB04

ICR410RB04 Whirlpool Cooktop - Overview

Get Parts and Repair Help for ICR410RB04

If you know the cooktop repair part you need, you can browse the list of all parts on the ICR410RB04, or you can search by name or part description. You can also find your part by where it is located on the ICR410RB04 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the ICR410RB04

[Viewing 1 of 1]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$4.89

SCREW

Sold individually.

$85.88

Radiant Surface Element with Limiter - 1200W

This is a radiant surface element with limiter, and it works in conjunction with your range. The function of this part is to give heat to the surface directly above it, on cooking area stove top.This model is sold individually and is 1200 watts. The main reason for needing to replace this part is if your element will not heat. Before ordering, make sure to test your stove top radiant element for continuity to make sure it is the problem. To make this installation you will need a Phillips screwdriver, and a 14-inch nut driver.

$48.30

6" Surface Element Infinite Switch

This switch controls the stove top surface burner.

$27.67

Cooktop Mounting Bracket & Screw

$53.41

Surface Element Switch - 1800W

This switch controls the stove top surface burner.

$25.57

SEAL-FOAM

$5.83

Wire Harness Clip

$46.87

Accusimmer Rotary Switch

$3.77

BRACKET, BURNER

Sold individually.

$4.89

Screw

Sold individually.

Common Symptoms of the ICR410RB04

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Hot Burner Light always on

  • Customer: Gregory from Cary, NC
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 93 of 129 people found this instruction helpful
Thermal switch is integral to element and can not be changed, must replace entire element.

Turn off power. Removed front two screws above oven door jamb and lifted the top. Removed the bracket that holds the element against the glass top and removed the element. Moved brackets from old element to new one, aligning to same numerical position and th... read more

Right Front Surface Element would not heat

  • Customer: Robert from Blackwood, NJ
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 71 of 82 people found this instruction helpful
Turn off the power to the Electric Oven.
Remove the 2 screws to the oven top at the front of the stove. Lift the oven top up. Have someone hold it for you. Label the wires that go to the element you are going to replace. Disconnect the wires from the Element. Remove the screw from the bracket that holds the front and rear element in place. It is located... read more

No heat on burner

  • Customer: paul from trumbull, CT
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers, Socket set
  • 31 of 43 people found this instruction helpful
Turned off electricity! Pulled stove out -lifted up glass top(carefully) simply removed burned out coil and replaced it with new one. read more