Models > IBMS1455VW0

IBMS1455VW0 Whirlpool Microwave - Overview

Get Parts and Repair Help for IBMS1455VW0

If you know the microwave repair part you need, you can browse the list of all parts on the IBMS1455VW0, or you can search by name or part description. You can also find your part by where it is located on the IBMS1455VW0 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Glass Cooking Tray


Baseless Lamp

This is a small light bulb.




Turntable Shaft

This part has a D-shaped shaft.




Glass Turntable Drive Coupler

This part accepts a D-shaped shaft.




LED Display Board





This part is used to generate microwave energy/heat.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Microwave glass turntable when pop

  • Customer: Liza from Monterey CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 19 of 23 people found this instruction helpful
After popping the last few kernals of popcorn, we hear a different kind of pop sound come from our microwave oven. When we looking inside, we found that the glass turntable had broken unevenly in half. Although we didn't understand why it had happned, we did know we'd be without the use of the microwave without a new one. After less than 10 minutes surfin... read more

This is a halogen light bulb. The bulb would not burn.

  • Customer: Robert J from Laguna Vista TX
  • Difficulty: Very Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Screw drivers, Socket set, Wrench set, Wrench(Adjustable)
  • 11 of 16 people found this instruction helpful
This is the second time this has occurred. The first was still in original warrenty. It took two Sears servicemen to dis mantel and obtain access to the bulb. One had to hold it up in the cabinet while the other took off the tope to get to the bulb. I purchased an additional extended warranty for three more years but when I called this time they said that li... read more

Lamp replacement

  • Customer: Peter D. from Smithtown NY
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 10 of 16 people found this instruction helpful
1)Power off 2) Remove frame covering front timer display - screw on the bottom 3) unscrew time display - 4 screws 4) unsnap lamp spring clip 5)replace lamp read more