Make sure you haven't got the discount earlier.
Parts That Fix General Electric Dryer HTX24GASK0WS Door won’t close
Door won’t close is a commonly reported symptom for the HTX24GASK0WS General Electric Dryer, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your HTX24GASK0WS General Electric Dryer that will fix Door won’t close. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
This is a genuine OEM part that works for some models of GE, and Hotpoint models. This Lint Filter is used for Dryer.
Customer Repair Stories
Broken/ Tore Lint Filter
-
Cristina from WHITTIER, CA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
Lint filter tore
-
Lisha|Lamb from SHELDON, MO
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
Customer Repair Stories
Broken Door Hinge
1) Remove the screws that holds the hinge to the body of the unit.
2) Remove the screws around the door so you can get to the hinge.
3) Remove bad hinge and replace with new one.
-
Rene from LAUD LAKES, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Replacing your General Electric Dryer Catch
This is the door switch for your dryer. Door switches are used to communicate with the control board when the door is fully closed, so the drying cycle can safely begin, and if it is opened so it can stop. If this door switch is damaged or bad from extended use or excessive force when closing, it will cause your dryer not to start, and it will need to be replaced. This door switch will require a few tools, such as a screwdriver, wrench, and pliers to replace, and some slight disassembly of your dryer. This door switch is an OEM part and is sold individually.
Customer Repair Stories
The dryer would not start.
-
Arthur from GUILDERLAND, NY
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set
Dryer would not start
-
Kenneth from COATESVILLE, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers