Parts That Fix Hotpoint Washer HTW200ASK0WW Spinning Issues
Spinning Issues is a commonly reported symptom for the HTW200ASK0WW Hotpoint Washer, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your HTW200ASK0WW Hotpoint Washer that will fix Spinning Issues. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
This is a speed sensor for a variety of washing machine models. Speed sensors are used to monitor the speed of the washer drum and communicate it to the electronic control board to slow or quicken it. If this speed sensor is damaged or bad, it will cause your washer drum to rotate too quickly, slowly, or inconsistently. Replacing this sensor will require a screwdriver and some minor disassembly of your washing machine. This sensor is an OEM part and is sold individually, so it does not come with any other parts or accessories.
This is a clutch for your washing machine. The clutch is made of a white plastic material and is used within washing machines to engage and disengage the transmission during the wash and spin cycles, and ultimately help spin the basket of the tub so your clothes finish damp and not soaked. If your washer has issues with spinning or agitating, this part is likely broken or has worn out, and will need to be replaced. To replace this part, some disassembly of your washer will be required, and tools like a screwdriver and socket wrench will be needed. This clutch is sold as an individual and does not come with any other parts.
This is a mode shifter or shift actuator for models of washing machine. Mode shifters are designed to change the function of the washing machine motor, between spinning cycles and agitation, and is usually installed at the bottom of the washer. If your washing machine is not spinning or agitating during its washing cycle, or if it simply does not start, this shift actuator is likely bad and in need of replacing. This shift actuator is made mostly of plastic, and features two holes to secure it with screws, as well as a single wire harness that connects within your washing machine. This shifter is an OEM part and is sold individually.
This drive belt is an authentic OEM part that is compatible with various models of washing machine. The drive belt is responsible for allowing the drum to rotate smoothly during the wash and spin cycles, as well as driving the pump to drain water from the machine. If the drive belt becomes worn, stretched, or damaged, it can cause issues such as the drum not spinning or the machine not draining properly. Your washer may also become excessively noisy during use. If the belt is faulty, it will need to be replaced to restore your washer.
This is a motor pulley and nut combo kit for your washing machine. This pulley is used within the transmission of your top-load washing machine to spin and agitate your clothes. If you notice your washing machine is not cleaning as effectively as it used to, check this pulley underneath your washer. It may be worn out and no longer able to effectively rotate the pulley, and successfully activate the agitator as a result. This OEM pulley and nut combo are the only parts included, and some disassembly of your washing machine is required to replace them.