Models > HTT15BBMERWW

HTT15BBMERWW Hotpoint Refrigerator - Overview

Get Parts and Repair Help for HTT15BBMERWW

If you know the refrigerator repair part you need, you can browse the list of all parts on the HTT15BBMERWW, or you can search by name or part description. You can also find your part by where it is located on the HTT15BBMERWW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for HTT15BBMERWW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the HTT15BBMERWW [Viewing 3 of 3]

$2.52

Light Bulb - 40W

Sold individually.

$44.55

Crisper Drawer Cover

This cover has the drawer slides built into it.

$53.57

Evaporator Fan Motor

This evaporator fan motor is located in the back of the freezer and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circu...

$2.23

Evaporator Fan Grommet - Red

$15.72

Retainer Bar End Cap

Sold individually.

$2.87

Evaporator/Condensor Fan Grommet

$1.53

Compression Ring

$15.48

Front Door Shelf Retainer Bar

End caps sold separately.

$11.93

Package of 12 Screws

$3.00

SWITCH LIGHT

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Freezer Fan

  • Customer: Luis from College Station TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 88 of 92 people found this instruction helpful
I removed two srews from the back panel inside fthe reezer compartment and the two that hold the air manifold/baffle? and pulled the baffle out. Then, I removed the two srews that hold the front part of the fan bracket behind the baffle and the back panel came out easily. Two more screws and one quick connect plug attached to the fan and I was done with remo... read more

Vegetable pan cover broke down the middle

  • Customer: Kim from Bronx NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 43 of 45 people found this instruction helpful
When the cover came to my apartment, I crossed my fingers that the piece would fit . Well, within 5 minutes the old cover was out and the new cover in. And it looks better than new! Finally, I don't have to hold my vegetable drawers up with a D battery! read more

Sticking Light Switch

  • Customer: Jonathan from Lilburn GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 36 of 40 people found this instruction helpful
I applied some tips learned by reading other reviews. So before I started I grabbed my trusty vise grip pliers and a small screw driver. I locked onto the switch actuator, the part that the refrigerator door pushes in, with the vise grips and pulled on it just hard enough to get the screw driver inserted in the right side to push in the catch clip so the swi... read more