Models > HTS17GBSERWW > Instructions

HTS17GBSERWW Hotpoint Refrigerator - Instructions

All installation instructions for HTS17GBSERWW parts

These instructions have been submitted by other PartSelect customers and can help guide you through the refrigerator repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the HTS17GBSERWW
121-135 of 138
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

fan motor

  • Customer: betty from mount vernon NY
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
watch the video very good

The fan motor started making noise

  • Customer: Donald from Denver PA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
The is my 'refreshment' cooler and sits in our garage. Hotter than heck in the summer so the things runs a lot. Started making a little growling noise. Had to partially disassemble the back panel to get to the fan. Touched the exposed shaft for a second and the sound stopped. OK, it's the fan. Went on line, used the (really great) exploded diagram to figure out what I needed. A couple days later the parts show up. Installed the new fan blade and retainer Removed the old motor (couple of mounting screws), connected the new motor (a plug in) and mounted the new motor making sure the grommet on the front and back were engaged. Turned the unit on and everything worked. Reinstalled the foam channel, the back panel and it ran perfectly. Great support (the diagram), fast delivery and fair pricing. Not bad!

The evaporator fan in the freezer compartment began making a loud noise.

  • Customer: Boyd from Rapid City SD
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
I found a replacement evaporator fan motor and 2 mounting bracket grommets at PartSelect.com at a reasonable price. I watched the installation video provided and installed the new parts as shown in the video start to finish installation time 22 minutes.i

In my rental house, something had happened to one of the freezer shelves by the previous tenants. It left only one shelf to use so I ordered a freezer door shelf which is basically a bar to hold things on the molded shelf. Without it, the shelf was unusable.

  • Customer: Cynthia from Paducah KY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
All I had to do was snap in the shelf. Done! Now the tenants have an extra shelf to use in the freezer.

Evaporator assembly was making noise and defrosting did not fix the problem.

  • Customer: Mir from Atlanta GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Thanks to your informative website, installation and assembly of the evaporator fan and motor was very easy. One thing I am constantly worried when I repair and replace parts around my house is getting correct and matching parts. Your website is very informative in this respect and the tutorial videos are excellent aids in replacing parts, fixing problems, and troubleshooting issues. I have added your website to favorites in my browse for future reference.

The door fixed shelf-white was broken in half

  • Customer: NawVaugn from Saint Paul MN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
When the new one came in, I just opened the refrigerator's door and plugged (put)it into place and slid down to lock it in place. That's it. The order situation was more frustrated than the installations part.

Bad switch for door prevented interior light from coming on

  • Customer: Patricia from Sylva NC
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Just as your video described, although due to the age of the fridge, it took a bit longer to remove the defective switch. Your video made this so simple, I can't imagine why we lived with a dark fridge for so long! I was ready to buy a whole new fridge, as repairmen are often nonexistent for small repairs. I am the biggest fan of your company & it's repair video. THANK YOU SO MUCH

Bulb replacement

  • Customer: Judith from Phoenix AZ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I pulled down the wire around the glass cover...released on end of the wire from its holder being careful to not let the glass cover drop. Unscrewed the bulb and replaced with replacement. Easy, easy.

Shelf broken, fresh door gasket destroyed by tenants

  • Customer: leonard from Hamilton NJ
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Followed the video about the gasket repair worked like a charm. Dryer for 5 minutes softened it and straightened it out like cake work. Snapped right in like the video, I thought it was too easy. Worked like a charm.

broken light switch

  • Customer: Francis from Holmes NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Popped out the old one and put in the new one it took five minutes.

loud noise from freezer compartment.

  • Customer: don from millsboro DE
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
very easy to replace fan and fan motor. solved the problem.

fan hung up and made a lot of noise, the shaft to fan blade had 1" play back and forth

  • Customer: John from EAGLE ROCK CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
I first watched the video on how to do it via YouTube, to make sure there were no hidden surprises. This was probably the easiest/ quickest repair I have ever done, the ONLY thing that took any time was removing the food from the freezer

light switch quit working

  • Customer: David from Simpsonville SC
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
removed the inside fridge electrical panel and swapped switches

very noisy when running

  • Customer: Carol from Black Canyon City AZ
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
I followed the video instructions and the job was done in no time at all

sticky switch

  • Customer: ANTHONY from NEW EGYPT NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
easy pry out, disconnect wiring, connect on new switch and press in switch.
All Instructions for the HTS17GBSERWW
121-135 of 138