Models > HTS17GBSERWW > Instructions

HTS17GBSERWW Hotpoint Refrigerator - Instructions

All installation instructions for HTS17GBSERWW parts

These instructions have been submitted by other PartSelect customers and can help guide you through the refrigerator repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the HTS17GBSERWW
91-105 of 138
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

broken shelf

  • Customer: John from Hazel Crest IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Very simple with repair instructions

Door shelf guard broke

  • Customer: Robert from Westmore VT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Snapped the old shelf guard pieces out and snapped the new one in.

Freezer worked well, refrig. always a bit warm

  • Customer: John Bloom from Florence AZ
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
First thing I did was un-plug the fan motor located in the freezer compartment and test it for voltage, which it had, telling me the fan motor was shot.I ordered the parts, they arrived in short order and the fan motor was replaced. It took little time and there were no levers, pulleys,servos, gobs of wiring or stacks of gears in a maze of bearings to deal with. Unplug the unit, remove the food rack, ice cube maker(just loosen the 2 screws and lift up)remove the air channel in the center as well as the back panel. Unplug the fan motor and remove the screws securing the motor bracket and lift out. Very simple.

Broken Shell frame for vegetable drawer

  • Customer: Cheryl from Kingston WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Received product in timely manner, Ordering was easy.thanks

replaced oven lightbulb

  • Customer: peggy ann from forest city NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
very easy

evaporotor fan only working on and off

  • Customer: Jose from Middletown NY
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
it was so easy to replace the part and good experience I love when I can trouble shoot and fix the problem

The track that holds the vegetable crisper drawers in place cracked

  • Customer: Ellen from Brooklyn NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I ordered the part Monday evening and had replaced the shelf on Wednesday. As easy as pie, no more difficult than the removal of a shelf when you clean the fridge.

shelf fram was broken

  • Customer: charles from washingtonville NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
put new frame in then slid the drawers in and replaced the glass. done!

replaced missing and broken parts

  • Customer: Michael from Lebanon OR
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Replaced missing and broken parts. Very pleased with the fast delivery and efficient online service.

A power surge made my side by side refrigerator stop working

  • Customer: Country at from SAYRE OK
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
I started at the compressor and replaced the overload and the Ptcr first and that did not make the compressor start running again, so I replaced the capasitor and it still did not start, so I bit the bulett and replaced the Main Control Board and that is what I should have checked first, when I removed the old one I found a little burnt spot on the back that I could not see from the front. The new one did not look exactly like the old one, it had two more wire terminals than the old one, but just leave them blank and everything will work just fine!

failed light switch

  • Customer: Jules from Crowley LA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
I started removing the switch by prying on the right side with a screwdriver, when it emerged enough I used pliers to finish removing it. I then unpluged rhe wires from the bad switch and pluged them on the new switch and "poped" it into the hole.

cracked vegetable drawer

  • Customer: maria from elmwood park NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I've seen your video and I just did exactly the same as your video and that was all it took. Thanks a million!!!!

noisy motor shaft loose

  • Customer: Dale from Williamsburg OH
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
I simply followed the online video instructions.made the job easy and fun.

no light in freezer

  • Customer: christopher from collegeville PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Connected the 2 wires and pushed in the switch until it clicked.

refrigerator and freezer would not cool

  • Customer: Robert from Brighton MI
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Remove back cardboard, slide clip off that holds capacitor in place then unplug. plug in new parts replace clip and back cover and your done! refrigerator works great again thanks for quick shipping as well.
All Instructions for the HTS17GBSERWW
91-105 of 138