Models > HTS17GBSARWW

HTS17GBSARWW Hotpoint Refrigerator - Overview

Get Parts and Repair Help for HTS17GBSARWW

If you know the refrigerator repair part you need, you can browse the list of all parts on the HTS17GBSARWW, or you can search by name or part description. You can also find your part by where it is located on the HTS17GBSARWW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for HTS17GBSARWW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the HTS17GBSARWW [Viewing 3 of 3]

$2.52

Light Bulb - 40W

Sold individually.

$2.23

Evaporator Fan Grommet - Red

$9.20

Door Fixed Shelf

$7.27

Door Fixed Shelf - White

$44.43

Vegetable Drawer Shelf Frame

Frame only. Glass NOT included.

$3.22

SWITCH LIGHT

$2.87

Evaporator/Condensor Fan Grommet

$1.53

Compression Ring

$20.09

Run Capacitor

This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.

$6.84

Evaporator Fan Blade

This blade attaches to the evaporator motor.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Freezer Fan

  • Customer: Luis from College Station TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 93 of 97 people found this instruction helpful
I removed two srews from the back panel inside fthe reezer compartment and the two that hold the air manifold/baffle? and pulled the baffle out. Then, I removed the two srews that hold the front part of the fan bracket behind the baffle and the back panel came out easily. Two more screws and one quick connect plug attached to the fan and I was done with remo... read more

Sticking Light Switch

  • Customer: Jonathan from Lilburn GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 39 of 43 people found this instruction helpful
I applied some tips learned by reading other reviews. So before I started I grabbed my trusty vise grip pliers and a small screw driver. I locked onto the switch actuator, the part that the refrigerator door pushes in, with the vise grips and pulled on it just hard enough to get the screw driver inserted in the right side to push in the catch clip so the swi... read more

Freezer cold, but Refrigerator not cooling. Iced up coils.

  • Customer: Scott from Pratt KS
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 38 of 45 people found this instruction helpful
After determining that it was the defrost system, I ordered the thermostat. Make sure you look closely. Mine had two thermostats, and so I had to wait a couple of days for the extra part.
1. Remove ice maker if installed.
2. Remove center casing on ceiling and back wall. There may be two screws that need removed.
3. Locate and remove two... read more