Models > HTDX100GD1WW

HTDX100GD1WW Hotpoint Dryer - Overview

Sections of the HTDX100GD1WW

[Viewing 5 of 5]

Manuals & Care Guides for HTDX100GD1WW

Click to download
Keep searches simple, eg. "belt" or "pump".
Drum Bearing Slide - White (Sold individually) – Part Number: WE1M504
Drum Bearing Slide - White (Sold individually)
★★★★★
★★★★★
(157)
PartSelect #: PS755842
Manufacturer #: WE1M504
This authentic, white Drum Bearing Slide, also known as the bearing drum slide, glide, or pad, is a plastic, easy-to-install part for your dryer. It replaces the dryer's front drum slide to allow for ...
$18.58
  In Stock
Drive Belt – Part Number: WE03X29897
Drive Belt
★★★★★
★★★★★
(168)
PartSelect #: PS16542496
Manufacturer #: WE03X29897
This Drive Belt is 89.5" long and comes in black, featuring four ribs on the inside for a better grip. This is a long belt that wraps all the way around the dryer drum, around a tension pulley, and th...
$36.13
  In Stock
Timer Knob – Part Number: WE1M652
Timer Knob
★★★★★
★★★★★
(275)
PartSelect #: PS1482196
Manufacturer #: WE1M652
This OEM Timer Knob is a white plastic knob which can be easily installed onto your machine's timer rod, in order to control the timer. If the part breaks off, it should be replaced. Refer to your use...
$19.38
  In Stock
D-Shaped Knob Clip – Part Number: WH01X10106
D-Shaped Knob Clip
★★★★★
★★★★★
(28)
PartSelect #: PS268493
Manufacturer #: WH01X10106
This clip ensures that the knob is securely fastened to the control shaft, allowing you to properly select the correct time and setting for your dryer. If your dryer will not start or shut off, the ti...
  No Longer Available
Rear Drum Bearing Kit – Part Number: WE25M40
Rear Drum Bearing Kit
★★★★★
★★★★★
(24)
PartSelect #: PS267529
Manufacturer #: WE25M40
This rear drum bearing kit includes a shaft, ground strap, bearing, seven screws, and installation instructions. The bearing plate comes with a slot in it for the ground strap. This part helps keep yo...
$88.17
  In Stock
Lint Filter - White Frame – Part Number: WE18X25100
Lint Filter - White Frame
★★★★★
★★★★★
(73)
PartSelect #: PS11767017
Manufacturer #: WE18X25100
This is a lint filter screen that is used for many dryers. It has a metal screen with a white plastic frame, and is approximately 13 inches wide. This part is sold individually. The lint filter traps ...
$70.13
  In Stock
Door Handle - White – Part Number: WE01X20419
Door Handle - White
★★★★★
★★★★★
(63)
PartSelect #: PS9494490
Manufacturer #: WE01X20419
This part is on the outer door of the dryer.
$25.14
  In Stock
Knob and Clip – Part Number: WH01X10313
Knob and Clip
★★★★★
★★★★★
(28)
PartSelect #: PS1482289
Manufacturer #: WH01X10313
This knob accepts a D-shaped shaft.
$13.04
  In Stock
Idler Pulley Wheel – Part Number: WE12X83
Idler Pulley Wheel
★★★★★
★★★★★
(7)
PartSelect #: PS265721
Manufacturer #: WE12X83
A dryer's idler pulley wheel serves to help the belt to rotate the drum.
$34.79
  In Stock
Push-to-Start Switch – Part Number: WE4M416
Push-to-Start Switch
★★★★★
★★★★★
(26)
PartSelect #: PS3487190
Manufacturer #: WE4M416
This switch is used to activate the dryer.
$18.20
  In Stock
Door Latch – Part Number: WE1M1011
Door Latch
★★★★★
★★★★★
(14)
PartSelect #: PS3502777
Manufacturer #: WE1M1011
This door latch is designed for your dryer, and is mounted to the dryer frame. The door latch holds the door of your dryer closed while the machine is operating. If your dryer door is not catching on ...
$11.38
  In Stock
Timer – Part Number: WE04X20415
Timer
★★★★★
★★★★★
(30)
PartSelect #: PS9491767
Manufacturer #: WE04X20415
This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.
$78.46
  In Stock

Questions And Answers for HTDX100GD1WW

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the HTDX100GD1WW

[Viewing 9 of 9]
Noisy
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Marks left on clothes
Fixed by
these parts
Fixing Fixing Fixing
Show All
Drum Not Spinning
Fixed by
these parts
Fixing
Show All
Won’t Start
Fixed by
these parts
Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing
Show All
Timer Not Working
Fixed by
these parts
Fixing
Show All
Touchpad does not respond
Fixed by
these parts
Fixing
Show All
Too hot
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Drum belt broke
Removed the front Dryer panel. Left drum in place and lifted it up slightly to get access to motor drive. Slipped belt in place and put panel back on.
This was a first attempt ever at fixing an appliance and it was no big deal.
Parts Used:
Drive Belt
  • Adrian from Middletown, MD
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
184 of 264 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The dryer door handle broke off.
I pried out the remaining pieces of the handle out of the door with a screwdriver. When the new part arrived, I snapped it into place and it was done. It fit perfectly.
Parts Used:
Door Handle - White
  • Jim from North Richland Hills, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
92 of 112 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would not start
The end repair was very simple and took minimal effort. The time and difficulty was all in the testing. I disassembled the dryer and removed the drum and then hard wired each thermo-fuse to determine where the fault was. After test all of those I was stumped. When I opened the door the light would not come on so I assumed it was a power fault closer to the source. However after all of my testing I couldn't find anything wrong. I then removed the light bulb and realized it was burned out which led me to the door switch being the fault. I removed the switch and soldered the three wire together and the dryer started right up! All I had to do was order a new $15 part, unsolder the wires and plug them in. Would have been so much simpler if that light bulb hadn't of been burned out causing me to over think my diagnosis. This was my first major appliance repair and I did it with only the help of the parts diagram provided on the website.
Parts Used:
Door Switch
  • Joshua from Dallas, TX
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers, Socket set
88 of 130 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!