Mon-Fri: 7am-1am EST / Sat-Sun: 7am-11pm EST
Below is a list of all parts for the Hotpoint Refrigerator HSS25GFPJWW - Side-by-side P Series. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
Also known as Thermistor. This part is used to sense the temperature in the cabinet.
When activated, the auger rotates and pushes ice out of the bin through the chute to the user.
This part acts as a safety device against over heating in case of mechanical failure.
This double outlet water valve has quick connections. This valve has 1/4 and 5/16 John Guest fittings for the outlet lines and a 1/4 compression fitting for the inlet line.
This board controls the operation of the unit. Note: This part has been updated by the manufacturer. It may differ in appearance but will function the same as the original.
NOTE: As per the manufacture this is an updated water filter. If you have never installed the updated filter or your old filter was made by Culligan, you may need the adapter to in...
When looking inside the fridge, this white drawer slide rail is located on the left side of the refrigerator. Rail ONLY.
Replacement icemaker kit - electronic. This kit includes a 4 pin round plug-in connector, 6 post plug-in connector, tube and fill cup.
This part is a possible option when ice door won't open or shut properly or when water is not dispensing.
This part mounts in the ice dispenser.
**** The crank no longer comes with this part. You can use original crank. The crank is sold separately depending on model number of appliance.
The defrost heater keeps the cooling coils from frosting over. The heater will get hot and melt any ice or frost build up around the coils.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2015 , Eldis Group Partnership. All rights reserved.