HGD4300TQ0 Magic Chef Dryer - Instructions

when I see its no gas flame, i deduct the flame sensor and the electric coils not fuction, I order tru partselect and that take me like 30 min. to remplaced those parts.

Removed the back panel and observed the Thermal Fuse at the bottom of dryer.One screw and two connectors and changed the fuse. Problem solved and Dryer working again. Easy Fix and Thanks.

Multimeter to check start switch, then thermal fuse. Removed back panel and replaced parts. Very easy for anyone to do.

From the description of the symptoms on the site and what part fixes those symptoms I was able to determine what part I needed. The video was very easy to follow and understand it was very helpful. Hands down the best parts website I’ve ever come across.

Removed the front panel (door and all) to repaired the belt as the instructions said took him 10 minutes. Than as we have the door off we snapped the old door catch out and snapped the other on in less than 5 minutes. The most work was me holding to front panel while my husband screwed the screws off and back on. Total time 25 minutes. My dryer is from the early 1990's. Our baby girl was in high school. She's 29 years of age now. As long as this company stays around we will be ordering our parts from PartSelect. Thanks!

Very detailed instructions.

I watched the repair video on your website,that was abig help , dryer runs good

Used the putty knife to pry open the front of the top cover. Removed the retaining screws securing front cover to each side. Lifted front panel off bottom hooks and holding drum, removed front cover. used wood block to hold drum in place. removed broken belt and belt tension spring. Keeping the rubber side of the belt against the drum, threaded belt through the tension spring onto the drive motor flywheel. Tilted dryer backwards to hold drum in place while removing wood block. Assembled front and top in reverse order. Used pressure to secure top to spring clips.

Let me put it to you this way I called the repair man and they would Charge me $150 to get the dryer fixed,by ordering the parts I spent $32 and 15 minutes installing it with the instruction video very easy to do Take the advice it yourself and save yourself some money $$$ With The extra cash I took my wife out for dinner Now that's money well spent...

Disconnected electrical output, closed gas valve and line. Removed back of dryer and removed wires to thermostat and replaced with new thermostat. Did not solve problems.

Disconnected electrical outlet, closed gas valve and removed line. Removed back of dryer and disconnected wires to fuse. Did not solve problem.

After diagnosing, easy removal and install.

Traced down where power stopped, put jumper in place of the thermal fuse anew found this was the problem. Ordered the part from part select

very simple. actually did a little more then was necessary. once we removed the back of the dryer, used our vacuum to vacuum up all the lint that was back there. Watched the video on how to repair the part when we ordered it and it was easy as can be.. we have used this web site to repair our oven, fridge and now the dryer. Everything went according to plan. I reccomend this site as much as i can and it has saved us a lot of money. Thank you!

When I initially inspected the dryer when it stopped working, I noticed a ball of lint had collected on the backside of the thermal fuse. I figured that had allowed the temperature to exceed the fuse's max temp. To relace, I simply removed the dryer's rear panel, disconnected the thermal fuse and replaced it. Once all back together, the dryer powered on with no problem.