Models > HDA3500N10BB > Instructions

HDA3500N10BB Hotpoint Dishwasher - Instructions

All Instructions for the HDA3500N10BB
481 - 495 of 533
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Water pump leaking, not empting water.
Replaced with new pump housing, impeller and seal kit, had to modify the pump housing to accommodate new impeller because the only other way would be to order a new moter and pump assembly.
Parts Used:
Upper Roller and Axle - Kit of 4 Single Drain Pump Housing
  • Ben from Bowman, GA
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Leaking around door.
Only needed Tub baffes to reseal door. Got the hint from past responces. Cured the problem and am greatful for the fast service and for the hint.
Parts Used:
Corner Tub Baffle - Lower Left Corner Tub Baffle - Lower Right
  • Douglas from Deland, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Upper basket roller axle broken
Removed upper basket from slide rails, then using needle nose pliers,Removed broken roller axles. New parts just snapped in place. Replaced all 4 roller axles in under 15 minutes.
Parts Used:
Upper Roller and Axle - Kit of 4
  • George from Trinidad, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
Upper rack came off roller
Super easy! Took old end caps off and slid rack out. could have re-used end caps, but got new ones just in case the old ones broke. Hardest part was removing old roller axles from rack. Flipped rack upside down on table and made it easy to put new axles and rollers on, slid rack back in and installed new end caps. Probably took 10 minutes to do repair.
Parts Used:
Upper Roller and Axle - Kit of 4 RACK SLIDE END CAP
  • Tom from Chesapeake, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
Dishwasher pump was frozen
Ordered pump mechanism and replaced defective pump. A very easy replacement
Parts Used:
Pump and Motor Assembly
  • George from Loving, NM
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
existing gasket dry rotted
This repoair was needed due to diswasher leaking out of side door. I just moved in about 6 months ago and needed to use dishwasher. When it leaked i noticed it was in need of a gasket. I searched the internet and came accross "part select". Part showed up in less than 3 days and was a breeze to install. The original gasket came out just by pulling, cleaned up channel and installed new gasket.slid in real easy. I did take off inner door panel to inspect for any damage. none noted. Perfect fit first time. Dont get confused folks if the part has another name as some parts are interchangeable in the industry.
Parts Used:
Door Gasket - White
  • Michael from Oronogo, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Water does not Drain
After installing the part, ran the washer once more. The water still remains in the washer. Tried washing several times. The problem is still the same.
Parts Used:
Drain Solenoid and Bracket Assembly
  • JAYANTI from KANSAS CITY, MO
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set, Wrench set
Was this instruction helpful to you?
Thank you for voting!
Washer pump faile
Removed old pump and replaced. Did not want to wait 2-3 weeks for a repair person
Parts Used:
Motor and Drain Pump
  • James from Plainfield, NH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
Was this instruction helpful to you?
Thank you for voting!
Upper Tray Rollers
I was able to fix without tools. Thanks ray
Parts Used:
Upper Roller and Axle - Kit of 4 RACK SLIDE END CAP
  • Ray from Simi Valley, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
Was this instruction helpful to you?
Thank you for voting!
Broken Lower Front Dishrack Wheel
Broken wheel fell off and landed on heating element, burning it and rendering it useless. Ordered new wheel from PartSelect including new axle, and installed on rack. PartSelect.com is an outstanding repair parts website! Excellent diagrams, video tutorials and great price and delivery. I am more than satisfied!
Parts Used:
Lower Front Dishrack Wheel
  • FRANK from OLIVE BRANCH, MS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
there was water coming out from the side
it took all of minutes to slip in place i will let everyone know about this site thank you again.
Parts Used:
Corner Tub Baffle - Lower Right
  • rose from VALLEY STREAM, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The rinse aid fill cap was stripped.
I removed the old cap and put on the new cap.
Parts Used:
Rinse Aid Fill Cap
  • Leanne from Divide, MT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Lower dishwasher rack rusted
Removed the old rack and slid in the new rack.
Parts Used:
LOWER RACK
  • Richard E. from Houston, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Top basket rollers broken
Replace all four upper basket rollers as well as the slide rail end caps.
Parts Used:
Upper Roller and Axle - Kit of 4 RACK SLIDE END CAP
  • Stanley from San Antonio, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
Broken upper rack axels
Took old ones off, put new ones on. It took longer to open the box
Parts Used:
Upper Roller and Axle - Kit of 4
  • Joe from Arvada, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the HDA3500N10BB
481 - 495 of 533
Back to Top