Models > HDA3400F00WW > Instructions

HDA3400F00WW Hotpoint Dishwasher - Instructions

All installation instructions for HDA3400F00WW parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dishwasher repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the HDA3400F00WW
706-720 of 742
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Leaking Dishwasher

  • Customer: Eugene from Port Saint Lucie FL
  • Difficulty: Really easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Replacing the two corner baffles was the third attempt to stopping the leak. I first replaced the door seal without removing the inner door and the leak did not stop. Then I removed the inner door, reinstalled the door along the bottom and added the small seal required at the lower center portion which is separate than the longer door seal. Still leaked! Then I replaced the corner baffles and alas., the leak stopped. I would recommend that all seals be replaced at the same time. Total cost about $40.00 and can easily be done in one hour or less. I ordered the parts And they arrived remarkably in les than 24 House with regular delivery. Very pleased with Parts Select instructions and service!

Dishwasher was leaking behind the door

  • Customer: Teddy from Houston TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
First open the door and look at the corner tub baffles. They are in the bottom corners where the door seals with the tub and they look alike. Remove and replace one at a time making note of the orientation. Make sure they are firmly seated in the bottom and close the door and enjoy.

Tub leaking at base of door

  • Customer: David from Parish NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Really simple. Remove old corner baffles by just lifting out and replace with new. Close door to insure the door seal aligns with the new baffles and good to go.

Dishwasher leaked out onto the floor on every use.

  • Customer: Mark from Freeport IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Opened the front door, replaced the right and left rubber baffles, which you just set in place, and replaced a missing wheel on the lower rack. Closed the door and ran the dishwasher through it's cycle, no more leaks!

water leak around door

  • Customer: D M from Fuquay Varina NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
open packages of baffles, installed per video, done, no leak!

water leak from underneath the unit

  • Customer: ANTHONY from NEW EGYPT NJ
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Wrench set
  • 0 of 0 people found this instruction helpful
After shutting off the water and switching off the electric, I removed the lower panels and disconnected both. I then pulled the unit out and set it on its back. I removed the related hoses and moved the pump to the side. Using a 2" X 6" piece of PVC pipe, I removed the wash arm rubber connector which had a small slit in it and installed the new one with the PVC pipe. After reconnecting the hoses and reversing the process, I powered up the unit resulting in another successful repair with the help of Parts Select.com.

water leaking left corner of door

  • Customer: william from ladson SC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
followed video no problem except door still leaked ordered and replaced door gasket and insert as per video ran through wash cycle after 1 hr started leaking again guess now I will have to replace washer all instructions in video were great and simple to follow it just did not solve my problem thanks

Dishwasher was leaking out the left front

  • Customer: Anita from Boon MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I ordered the corner baffles and installed them in the corners in just minutes. Repair company quoted me about $100 if they had the parts on the truck. If they had to come back it would be another service call. Did the repairs my self for $24 with shipping charges. Happy Customer

Leaking

  • Customer: Valerie from Bedford TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
When I first noticed my unit leaking I noted that the leak was dripping right in the middle. So, I went straight to this web site with my model number and the 1st part I saw was for a Gasket Insert which is a small piece that completes the sea. I received that part in 2 day and did the repair and I still had leakage. I went back on the web site and looked further and came across info for the Corner Tub Baffles. I did not even know there were there. I removed mine and it was very obvious that the original Baffles were very worn and wrapped. In addition, the unit was quite filthy. I ordered the two replacement baffles. The parts arrived in two days, did the minor repair and now I have no leaks.

leaking drain valve shaft seal

  • Customer: Jim from Commerce TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
used the repair info from your website, many thanks! now I know where to come next time.

leaking drain valve. note i took the disherwasher out about six months to remodel the kitchen it wasn't leaking when i took it out , but being out so long with out water in it, it started to leak when i put it back in !! !!

  • Customer: ronald from pompano beach FL
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers, Socket set, Wrench set
  • 0 of 0 people found this instruction helpful
i replaced the drain seal without removing the dishwasher as far as the push on nut i had to use a round punch to open the tabs a little.. i also used Vaseline to hold the c clip in place to snap it in with a screwdriver

Water leak from gate (diverter) valve

  • Customer: Robert from Oak Island NC
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
Read Joseph from Livermore, CA for good instructions. I took a camera phone photo for reference before I started. Should have taken another photo half way thru. Probably put the push-on-nut on backwards as it didn't 'lock' in - had too much play in the shaft, would have leaked. Impossible to get nut back off in good shape. I put original mangled push-on-nut on also - it added enough tension to eliminate play in the shaft. No leak..but lucky. Go ahead, you can do this repair for under $20.

leaking water around door

  • Customer: Don from Waunakee WI
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
went to YOU TUBE and watched the "gent" from Parts Select....and he walked me through the repair. Ran a load of dishes and no leak. thank you Parts Select.

leaking during cycles

  • Customer: Bonnie from Sebring FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
My machine stopped leaking after I simply massaged the door gasket and cleaned the baffles. I did order the necessary parts, they arrived in a very timely manner and the process was painless. After watching the video for both the door gasket and the tub baffles, when my machine decides to leak again, I will be ready to install new parts. As a snow bird, my machine sits idle for 6 months and I think things tend to dry out. Wonderful experience in ordering and video watching.

Small leak at the bottom of dishwasher

  • Customer: Harry from Bayside NY
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Removed existing gasket seal on door. Cleaned really well with a household cleaner around the gasket crease. Installed new gasket seal around door. Started with small notch in the middle of the gasket to center on top and then slowly fastened into door edge and slowly snug around bottom edge where the deal is notched and the the difficult part was to feel the seam again on the bottom to re attach seal after notch from corner. Rupert this on the other side of door.
All Instructions for the HDA3400F00WW
706-720 of 742