Models > HDA2030Z02WW

HDA2030Z02WW Hotpoint Dishwasher - Overview

Sections of the HDA2030Z02WW

[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
Lower Rack Wheel Kit - 8 Pack – Part Number: WD35X21038
Lower Rack Wheel Kit - 8 Pack
★★★★★
★★★★★
(156)
PartSelect #: PS11726733
Manufacturer #: WD35X21038
This lower rack wheel kit includes 8 wheels and 8 axles that allow the lower dishwasher rack to slide in and out smoothly. If your dishwasher door will not close, is noisy when operating, or the dishe...
$36.88
  In Stock
RACK SLIDE END CAP – Part Number: WD12X10304
RACK SLIDE END CAP
★★★★★
★★★★★
(52)
PartSelect #: PS2370502
Manufacturer #: WD12X10304
The Rack Slide End Cap is a white one-inch plastic part which replaces the end cap for your dishwasher rack, preventing your rack from sliding too far. If you find the dish rack is causing the door to...
$12.63
  In Stock
Upper Roller and Axle - Kit of 4 – Part Number: WD12X10327
Upper Roller and Axle - Kit of 4
★★★★★
★★★★★
(82)
PartSelect #: PS3486910
Manufacturer #: WD12X10327
The dishwasher roller assembly attaches to the upper dishrack. It allows the dishrack to slide out easily. If the upper rack keeps falling off the track in dishwasher, the door will not close, the doo...
$19.98
  In Stock
Lower Front Dishrack Wheel – Part Number: WD12X271
Lower Front Dishrack Wheel
★★★★★
★★★★★
(10)
PartSelect #: PS259136
Manufacturer #: WD12X271
The lower dishrack wheel on your dishwasher allows the dishrack to roll in and out effectively. If your lower dishrack wheels are damaged, or the rack does not roll in and out, you may need to replace...
$16.38
  In Stock
Corner Tub Baffle - Lower Right – Part Number: WD8X227
Corner Tub Baffle - Lower Right
★★★★★
★★★★★
(12)
PartSelect #: PS263963
Manufacturer #: WD8X227
This baffle fits the lower right hand corner of some dishwashers. It is black rubber and has a matching left hand lower corner baffle. It is recommended that you replace and install both left and righ...
$25.92
  In Stock
Corner Tub Baffle - Lower Left – Part Number: WD8X228
Corner Tub Baffle - Lower Left
★★★★★
★★★★★
(19)
PartSelect #: PS263964
Manufacturer #: WD8X228
The corner tub baffle may also be known as the door baffle and is a part used on your dishwasher. The left and right side baffle on your dishwasher should be installed and replaced at the same time. T...
$23.87
  In Stock
LOWER RACK – Part Number: WD28X31819
LOWER RACK
★★★★★
★★★★★
(69)
PartSelect #: PS17137102
Manufacturer #: WD28X31819
This part includes the wheels.
$205.46
  In Stock
Interlock Switch – Part Number: WD21X10261
Interlock Switch
★★★★★
★★★★★
(18)
PartSelect #: PS1481922
Manufacturer #: WD21X10261
The interlock switch may also be referred to as a belt switch. This part is a simple on/off mechanism that prohibits the appliance from operating when the door is open. This is a part for your dryer. ...
$27.45
  In Stock
Push On Nut – Part Number: WR2X7054
Push On Nut
★★★★★
★★★★★
(6)
PartSelect #: PS298353
Manufacturer #: WR2X7054
This push on nut is for your dishwasher or refrigerator. As the name suggests, it pushes into place, rather than being screwed in. It is approximately half an inch in diameter and is made of stainless steel.
$13.83
  In Stock
Rinse Aid Fill Cap – Part Number: WD12X10284
Rinse Aid Fill Cap
★★★★★
★★★★★
(11)
PartSelect #: PS2351824
Manufacturer #: WD12X10284
This part helps keep the rinse aid the dispenser until its needed.
$18.37
  In Stock
Hinge Arm Link – Part Number: WD14X10009
Hinge Arm Link
★★★★★
★★★★★
(9)
PartSelect #: PS259336
Manufacturer #: WD14X10009
The hinge link on your dishwasher connects the spring to the dishwasher door hinge. If the hinge link becomes cracked or damaged, you may not be able to shut or lock your dishwasher door properly. In ...
$8.54
  In Stock
Motor and Pump Kit – Part Number: WD26X10013
Motor and Pump Kit
★★★★★
★★★★★
(9)
PartSelect #: PS260801
Manufacturer #: WD26X10013
This is a pump and motor kit for your dishwasher. This assembly replaces many old-style pump and motor kits that were manufactured since 1970. The instructions are included with this kit in to assist ...
$249.86
  In Stock

Questions And Answers for HDA2030Z02WW

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the HDA2030Z02WW

[Viewing 10 of 10]
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Not cleaning dishes properly
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not dispense detergent
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door latch failure
Fixed by
these parts
Fixing Fixing Fixing
Show All
Not draining
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not fill with water
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Noisy
Fixed by
these parts
Fixing Fixing Fixing
Show All
Not drying dishes properly
Fixed by
these parts
Fixing Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The rollers on the upper rack broke
There are eight guides that hold the rack rails in place. Use a Phillips screwdriver to remove the top two guides on each side in order to remove the rack from the dishwasher. The plastic axles on the rack and the rollers snap on. Use the hammer and punch to bend the metal clip on one end of the rail. Remove the plastic end piece then slide the rollers out. Place two new rollers in the rail and put the plastic end piece on. Use the hammer and punch to bend the metal clip back into place. Snap the rails on the rack and set the rack on the guides in the dishwasher. Replace the top guide using the screwdriver, you will have to twist the rails in order get them in between the
guides.
Parts Used:
Upper Roller and Axle - Kit of 4
  • Carl from Fairfield, TX
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
542 of 569 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower rack wheel was melted
Unsnapped clip,and moved it 90 degrees. Slip wheel and clip off. Installed clip on new wheel. replaced new wheel. The wheel did not come with a new clip and was not suggested on the parts list. The existing clip was still OK but if it was not, I would have had to order a clip and wait. All in all, a good experience.
Parts Used:
Lower Rack Wheel Kit - 8 Pack
  • Mark from Huntingdon Valley, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
520 of 541 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheel broken off bottom rack
Open the tiny plastic package in inserted the wheel onto the "axle". Opened the dishwasher, pulled out the bottom rack and snapped the wheel onto the rack. Done!
Parts Used:
Lower Front Dishrack Wheel
  • Julie from Maumee, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
500 of 514 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!