Models > HDA110S-48AW > Parts

HDA110S-48AW Hotpoint Dishwasher - Parts

All parts for the Hotpoint Dishwasher HDA110S-48AW

Below is a list of all parts for the Hotpoint Dishwasher HDA110S-48AW - 1993 PRODUCTIVITY MODEL. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the HDA110S-48AW
1-14 of 122
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$9.93

Lower Rear Rack Wheel and Axle Kit

This kit contains one wheel and one axle. It is designed for the rear lower dishrack. Sold individually. Order quantity needed.

$0.69

RACK SLIDE END CAP

This part attaches to the rails, for the upper rack, to prevent the dishrack from sliding all the way out.

$8.77

Lower Front Dishrack Wheel

This wheel is located on the front lower rack. It includes the axle. Sold individually.

$10.20

Upper Roller and Axle - Kit of 4

$7.02

Corner Tub Baffle - Lower Left

The left and right side baffles should be installed/replaced at the same time. Right side baffle is sold separately.

$7.02

Corner Tub Baffle - Lower Right

This baffle fits the lower right hand corner of some dishwashers. It is black and has a matching left hand lower corner baffle. It is recommended that you replace and install both left and right at the same time.

$13.02

Silverware Basket

This silverware basket is gray.

$7.93

Door Cable and Eyelet

This part is sold individually. It is recommended that both sides are changed when replacing one.

$16.89

Drain Valve Shaft Seal

$10.25

Interlock Switch

This part is a simple on/off mechanism that prohibits the appliance from operating when the door is open.

$2.79

Push On Nut

$8.79

Rinse Aid Fill Cap

$146.32

Motor and Pump Kit

This pump and motor kit replaces many old style pump and motor kits that were manufactured since 1970. The instructions are included with this kit to help you to make it adaptable ...

$21.09

Water Inlet Valve

This water inlet valve is specially designed for those dishwashers that fit under the counter from 1974 To Present. The valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.

All Parts for the HDA110S-48AW
1-14 of 122