Quick Question!

Have you ever purchased from PartSelect.com before?

Models > GX900QPLQ0 > Parts

GX900QPLQ0 Whirlpool Trash Compactor - Parts

All parts for the Whirlpool Trash Compactor GX900QPLQ0

Below is a list of all parts for the Whirlpool Trash Compactor GX900QPLQ0. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the GX900QPLQ0
15-28 of 140
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$20.79

Power Nut Kit

Includes everything pictured above.

$64.90

HANDLE

$27.09

On/Off Switch Knob

This knob may also be called a Key.

$2.94

Nut

Sold individually.

$5.81

USE MAC 41001134

$4.79

Screw

Sold individually.

$3.81

Touch-up Paint - Almond

$181.24

Drive Motor

This drive motor is for trash compactors. The drive motor turns the gears and chain that raise and lower the compactor ram. If your trash compactor will not start or will not stay on during the compaction cycle, you may have a defective drive motor. The start or run switch is used to supply power to the motor to initiate the compaction cycle. If the windings in the motor are open or if the motor centrifugal switch is open, the unit will not start. To check for a defective motor, you will need to remove the unit from the cabinets and disconnect the power.

$3.02

Screw, 8-18 x 1/2 (2)

Sold individually.

$89.36

Selector Off Switch

Used with trash compactors.

$44.29

Foot Pedal - White

This part is used to operate the trash compactor.

$34.03

Toeplate Guard

This part is located at the bottom of your appliance.

$6.36

Touch-up Paint - Black

16ml

$30.25

Silicone Rubber Adhesive - 2 oz

Silicone rubber adhesive is a high temperature adhesive that is used for gaskets on dryers and felt seals. It is used on many different appliances for many different application reasons. This silicone paste creates a waterproof seal between components. This product is a 2 oz. tube. Unplug your appliance if you will be working on any internal workings and applying this sealant. Wear gloves to protect your hand from accidently applying sealant to your skin. The surface must be clean, dry, and free from oil and grease. Coat one surface and let it dry for at least one minute and then bond.

All Parts for the GX900QPLQ0
15-28 of 140