Quick Question!

Have you ever purchased from PartSelect.com before?

Models > GW397LXUB0

GW397LXUB0 Whirlpool Range - Overview

Parts and Repair Help for models starting with GW397LXUB0

If you know the range repair part you need, you can browse the list of all parts for models starting with GW397LXUB0, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for GW397LXUB0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Models starting with GW397LXUB0

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

$50.37

Oven Igniter - Vertical Mount

This broil igniter assembly comes with its own metallic mounting bracket and an seven inch long dual wire lead with a plastic plug.

$23.99

Short Oven Sensor Kit

This temperature sensor detects the temperature within the oven cavity.

$22.22

2 Piece Broiler Pan

The top of this part is now black.

$66.33

Inner Door Glass Pane

Glass only.

$7.20

Touch-Up Paint - White

18ml

$7.35

CLEANER

$11.07

Spray Paint - 12 oz. - White

$100.06

Spark Module

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

$5.70

Appliance Scraper

Use this scraper for your ceramic/glass cooktop. It has a retractable blade and is an all-purpose tool for cooktops, mirrors, windows and tile. Use it to also remove paint, paper, dirt, stickers and more.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven wouldn’t heat up properly

  • Customer: James from Berwick, ME
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 193 of 216 people found this instruction helpful
My oven has two igniters so I needed to determine which one was the problem.

Using the amp/multi meter I tested the connection between the igniters and the valve, with the oven turned on, to find the bad igniter. Depending on the model of stove you have, the amp reading you need for a properly functioning igniter will vary. My lower igniter read ... read more

F1 code - gas over would not heat.

  • Customer: george from birmingham, AL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 120 of 129 people found this instruction helpful
Repair tech checked oven and said the control panel was bad and needed to be replaced. The new control panel would cost over $450.00! I found that the oven sensor was bad and replaced it for $30.00. The old oven sensor had failed following a self cleaning cycle. I found that the wires coming out of it were burnt.

Replacing the oven sensor was ... read more

Number touch pad would only work on #4 and #1

  • Customer: Ken from Cedar City, UT
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 58 of 71 people found this instruction helpful
First turn off circuit breaker to stove. Slide the stove out about 4 inches from the counter to expose the two phillips head screws, one on the left side and one on the right side of touch panel. Take out screws. Then take out four Phillip head screws on the bottom side of panel, this will set panel loose from stove. Carefully pull up touch pad (switch membr... read more