Models > GUD24ESSM1WW > Symptoms > Won’t Start

Parts That Fix General Electric Washer Dryer Combo GUD24ESSM1WW Won’t Start

Won’t Start is a commonly reported symptom for the GUD24ESSM1WW General Electric Washer Dryer Combo, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your GUD24ESSM1WW General Electric Washer Dryer Combo that will fix Won’t Start. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!

1 Push-to-Start Switch
Fixes Symptom 75% of time
Push-to-Start Switch – Part Number: WE4M416

This switch is used to activate the dryer.

$ 18.23
  In Stock
PartSelect Number PS3487190
Manufacturer Part Number WE4M416
2 Door Switch
Fixes Symptom 13% of time
Door Switch – Part Number: WE4M415

A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.

$ 32.55
  In Stock
PartSelect Number PS2344321
Manufacturer Part Number WE4M415
3 Interlock Switch
Fixes Symptom 12% of time
Interlock Switch – Part Number: WD21X10261

The interlock switch may also be referred to as a belt switch. This part is a simple on/off mechanism that prohibits the appliance from operating when the door is open. This is a part for your dryer. The interlock switch senses the door is shut and the dryer can begin. This part might need to be replaced if your dryer is not starting or is in process while the door is open. The black rectangular part of the switch is approximately 2 inches long and a 1/2-inch wide with two gold plates on either end. This is a genuine OEM part that is sourced right from the manufacturer.

$ 27.50
  In Stock
PartSelect Number PS1481922
Manufacturer Part Number WD21X10261
Back to Top