The tub dampening straps support the wash tub and reduce vibration by keeping the tub at the center of the cabinet. If your washer shakes and moves, or is making a loud banging noise during the wash c...
$9.61
In Stock
Order within the next 4 hrs and your part ships today!
This set (Knob and Clip Assembly, Control Knob, Dryer Control Knob) allows you to replace the knob on your timer if it is damaged or missing. The plastic knob can break around its shaft, or the retain...
$40.47
In Stock
Order within the next 4 hrs and your part ships today!
This is a replacement timer knob for your washing machine. To complete this repair you will need a pair of needle nose pliers. Turn off power to the washer before you start. Pull off the timer knob an...
$17.94
In Stock
Order within the next 4 hrs and your part ships today!
This clip ensures that the knob is securely fastened to the control shaft, allowing you to properly select the correct time and setting for your dryer. If your dryer will not start or shut off, the ti...
The drain hose is black in color and made of flexible material. This is a part for your top-load washer. The hose measures 57 inches long. This part moves the water out of the washer and into the drai...
$27.09
In Stock
Order within the next 4 hrs and your part ships today!
This is a dual-action agitator for a washer. It is an OEM replacement part that is sourced from the manufacturer. The agitator tosses your clothes to clean them efficiently. This plastic dual-action a...
$75.31
In Stock
Order within the next 4 hrs and your part ships today!
This timer dial with compression ring shows you which part of the cycle your washer is in. It is white in color and can be found mounted on the timer shaft. You may need to replace this part if your ...
$14.29
In Stock
Order within the next 4 hrs and your part ships today!
The main tub seal is located between the transmission and the outer tub. Its the primary water seal in the outer tub for the transmission-shaft. If your washer is leaking during the fill cycle, or at ...
$16.73
In Stock
Order within the next 4 hrs and your part ships today!
This is a tub bearing and it is meant to work in conjunction with your washing machine. The purpose of this part is to aid in keeping the inner tub of your washing machine spinning smoothly during a w...
$9.97
In Stock
Order within the next 4 hrs and your part ships today!
This split ring is supplied by the original equipment manufacturer, and it is designed to secure the tub bearing in washing machines. It is a circular metal ring, with an outer diameter of 2 inches. T...
$14.41
In Stock
Order within the next 4 hrs and your part ships today!
This tub bearing goes in your washing machine. You will find it on the bottom of the outer tub, where the transmission goes through the tub. If you hear metal on metal when the washer is spinning, you...
$27.53
In Stock
Order within the next 4 hrs and your part ships today!
Questions And Answers for GTWP1800D2WW
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dianna
November 26, 2019
My be top loader was making a loud noise when washing. I replaced the tub dampening straps but now my washer sounds like it's going threw the cycles but nothing is happening. The agitator just sits without moving.
For model number GTWP1800D2WW
Hello Dianna and thanks for writing.
You should check the following part for damage or misalignment
Agitator # PS11736866
Coupling # PS1482517
Belt # PS1482278
We hope this helps. Please contact us anytime. Good Luck with your repair.
Hello Teresa,
Thank you for your question. Our sources suggest replacing the drive belt under part PS1482278 for your model to fix the issues. We hope this helps!
Hello Helena,
Thank you for your question. Our sources suggest replacing the drive belt for your model under part PS1482278 to fix the issue. We hope this helps!
I replaced the bearing and bearing washer because it sounded like metal on metal and loud on spin.Now it is still very loud on spin but does not sound like metal on metal and shaking. Any suggestions?
For model number GTWP1800D2WW
Hi John, thank you for your inquiry. We have found that the issue is with the suspension rods and spring assembly. The rear suspension rod assembly is part number PS3654191. The front suspension rod assembly is part number PS3654190. We hope this solves your problem!
I spoke to a very nice young ladie who took my order and I received my order within two days. I pull the clasp off of the old knob and replace the knob and the clasp with the new part and it now works great. Thank you for helping me find the part I needed.
After removing frt panel which prys off I checked for anything obvious like a loose belt. Then I jiggled the magnet switch located on the inside of the loading cover. I saw the machine start agitating the it stopped again when I stopped touching it. I ordered the new part and spliced it in with the wire crip tool. Now the machine is A ok.
