This lid lock, also known as a door lock, is a genuine OEM replacement part for your washing machine. The lid lock keeps your washer lid closed during the washing cycle. If this part is broken, your w...
This drain pump assembly is for washers. Drain pump assembly removes water from the washer during the drain portion of the cycle. The assembly may include multiple parts; refer to your parts diagram f...
This lid lock striker is sourced directly from the manufacturer for use in top-load washing machines. It is a white, plastic component located on the underside of the washing machine lid. When the lid...
This drive belt is an authentic OEM part that is compatible with various models of washing machine. The drive belt is responsible for allowing the drum to rotate smoothly during the wash and spin cycl...
This is an agitator assembly for washing machines. Agitators are used within top load washing machines to move back and forth and effectively wash your clothes. However, if the agitator currently in y...
This is a water inlet valve; an electrically controlled solenoid valve that opens and closes when necessary, to control the flow of water into your washing machine during the washing cycle. This part ...
This lid lock bezel, also known as a trim piece, is a genuine OEM part designed for washing machines. It is approximately 3.5 inches long. The bezel is a white, plastic frame that fits around the peri...
This is a clutch for your washing machine. The clutch is made of a white plastic material and is used within washing machines to engage and disengage the transmission during the wash and spin cycles, ...
This is a mode shifter or shift actuator for models of washing machine. Mode shifters are designed to change the function of the washing machine motor, between spinning cycles and agitation, and is us...
This is a speed sensor for a variety of washing machine models. Speed sensors are used to monitor the speed of the washer drum and communicate it to the electronic control board to slow or quicken it....
Ask our experts a question about this model and we'll get back to you as soon as possible!
7 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Willie
January 2, 2020
My washer is dripping water out the outlet of the washer when it is turned off
For model number GTW220ACK1WW
Hi Willie, thank you for your question. You may need to take a look at your hose to see if there is anything blocking it so that the water does not drain out completely and you have that leaking. You may also need to take a look at your drain pump for potentially being the issue. Good luck with you repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Quincy
January 28, 2020
Washer won't fill correctly
For model number GTW220ACK1WW
Hi Quincy, thank you for your question. If your appliance is not filling with water there are two parts to check. You should take a look at your water inlet valve. If that part is fine then you may have to take a look at your door lock. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Rose
May 11, 2023
I filled my washer & paused it with lid open. later that night it started to spin out then making noise like trying to wash with no water. couldn't get it to stop, no lights on, had to unplug it. when pluged in it still doing same. I don't know what to do. Please HELP.
For model number GTW220ACK1WW
Hi Rose, thank you for reaching out. According to our research and considering the symptoms you mentioned, the issue seems to be with the control board, part number PS16874148. A faulty or stuck relay on the control board might be causing the washer to start by itself and not turn off. Checking the control board for continuity using a multimeter might help. Good luck with the repair!
Tried replacing my lid switch and now I have no power. I’ve tested the outlet I've tested the power cord the board does not seem to have any problems with it but I need a direction.
For model number GTW220ACK1WW
Hello Jeremy, Thank you for the question. This sounds like a wiring issue. Something could have come loose when installing the Lid Switch. We suggest following the wiring to check for loose connections or damage. We hope this helps!
Was this helpful?
Thank you for voting!
Jeremy
September 1, 2021
Will the lid switch cause the washing machine not to have power at all? I have no lights showing on my dash of my washing machine.
For model number GTW220ACK1WW
Hello Jeremy, Thank you for the question. The Lid Switch would prevent the cycle from starting but the appliance would still have power. We suggest testing the Start Capacitor. If it shows to have continuity, you may have a defective User Interface Board. We hope this helps!
Drain all the water out of the tub with a shop vac Remove rear drain hose and drained rest of water into a bucket Remove small rear panel (bottom left hand corner) where the drain hose connects Tipped washer up about 45 degrees to get underneath it - Supported it with a few paint cans Remove internal drain hose/clamps
... Read morefrom pump - w/ pliers Remove belt cover (gray plastic) with socket - 3 bolts Remove wire assembly plug from socket Remove old drain pump with socket - 3 bolts Install new drain pump - 3 bolts - plug wire assembly into socket Reinstall belt cover - 3 bolts Reinstall hose to drain pump (note panel will be inside washer) Feed drain hose panel through hole and reinstall - 1 nut Re attached drain hose to exterior drain plug You are done !
Very simple to repair. Be sure to drain the tub outside or into the sump pump then lay the washer on its side. The pump is right there on the bottom of the basket with 3 bolts. You will also need to remove the belt cover to get to the plug. So simple and saves you hundreds off repair man prices.
