This Drive Belt is 89.5" long and comes in black, featuring four ribs on the inside for a better grip. This is a long belt that wraps all the way around the dryer drum, around a tension pulley, and th...
$36.13
In Stock
Order within the next 11 hrs and your part ships today!
This drum glide bearing is an authentic OEM replacement part that is compatible with dryers. It is white in color and made of highly durable plastic. The bearing allows the drum to rotate smoothly and...
$13.17
In Stock
Order within the next 11 hrs and your part ships today!
This door latch is designed for your dryer, and is mounted to the dryer frame. The door latch holds the door of your dryer closed while the machine is operating. If your dryer door is not catching on ...
$11.38
In Stock
Order within the next 11 hrs and your part ships today!
The interlock switch may also be referred to as a belt switch. This part is a simple on/off mechanism that prohibits the appliance from operating when the door is open. This is a part for your dryer. ...
$27.45
In Stock
Order within the next 11 hrs and your part ships today!
TThe door strike for your dryer is mounted on the dryer frame that the door shuts onto. It fits into the door catch on the door and keeps the door closed. If the door strike is damaged or missing, the...
$8.54
In Stock
Order within the next 11 hrs and your part ships today!
This is a door handle made for use with dryers. This door handle is made of solid white plastic and allows you to open and close the door of the dryer. If your current dryer door handle is broken or m...
$70.91
In Stock
Order within the next 11 hrs and your part ships today!
This is a replacement O-ring for the drum bearing retainer on your dryer. The drum bearing is found at the back of the dryer drum. The O-ring is designed to create a seal on the drum bearing. The O-r...
$9.01
In Stock
Order within the next 11 hrs and your part ships today!
Questions And Answers for GTUN275EM2WW
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Donna
February 24, 2020
No power going to washer but dryer works fine what part do i need to get the washer going again
For model number GTUN275EM2WW
Hi Donna,
Thank you for your question. If the washer is not working, there are some parts that you will need to check to see which one is causing the issue. You will need to check the electronic control board and the door latch lid lock. To test the door latch lid lock you will need to test it with a multi-meter. Unplug your washing machine. Remove the cabinet or top panel and locate the lid switch. After finding the switch, begin by ensuring that no levers or actuators are damaged or sticking and that the switch is being activated mechanically when the lid is closed. If no issues are found when performing the above checks, remove the switch and set your multi-meter to the Rx1 setting. While pressing and holding the switch button, place the probes on the switch’s terminals, you should receive a reading of zero. If you receive a different reading, you will need a replacement lid switch. For the electronic control board, you will need to check it for signs of damage, wear and burn marks. If it shows any of these signs, it will need to be replaced. We hope this helps. Thank you and have a great day.
Was this helpful?
Thank you for voting!
Terri
February 5, 2023
Washer fills up with water, clicks to start washing, then immediately shuts off.... Push the start button, turns on and immediately shuts off
For model number GTUN275EM2WW
Hi Terri, thank you for the question. We would recommend checking the lid lock switch assembly, part number PS3496878, and the control board, part number PS5573578. These are the probable culprits. Good luck with your repair!
My stackable washer and dryer fills up with water, then it engages, then quickly shuts off. Thank you!!
For model number GTUN275EM2WW
Hello Teri, thank you for the question. According to our research, you may need to check the timer, part number PS11721520, to fix the issue. We hope this solves your problem!
Need to replace the switch down by the motor. The switch is square, less than 5 inches long. It has 2 prongs hanging from the bottom of the switch where a wire is attached to each prong.The orange switch is to the left of the motor belt. I need this part. Thank you kindly!
For model number GTUN275EM2WW
Hello Terri, thank you for contacting us. The switch you are looking for is not sold separately, it comes with the fork support assembly, part number PS3501444. We hope this information helps!
Removed the front Dryer panel. Left drum in place and lifted it up slightly to get access to motor drive. Slipped belt in place and put panel back on. This was a first attempt ever at fixing an appliance and it was no big deal.
It was actually my father, he doesn't use the internet. He thought that because the dyer got real hot and then shut off he thought the thermostat wasn't working and the high temp shutoff was okay. He went through the manual and found the part and took it out. He called the service number but they wanted $50 dollars plus shipping. I saw it
... Read more was a Thermo-disc part so I tried the manufacture's website but I couldn't match the numbers on the back to their part numbers. I tried several other sites and your site was the cheapest. It was real easy to use the web site and diagrams to find the right schematic and part. I ordered it online and it was delivered in 2 days with the regular shipping. When he first put it in the dyer didn't turn on. He found no power coming out of the timer so he cleaned the contacts and it worked. Thanks for making the ordering so easy.
The end repair was very simple and took minimal effort. The time and difficulty was all in the testing. I disassembled the dryer and removed the drum and then hard wired each thermo-fuse to determine where the fault was. After test all of those I was stumped. When I opened the door the light would not come on so I assumed it was a pow
... Read moreer fault closer to the source. However after all of my testing I couldn't find anything wrong. I then removed the light bulb and realized it was burned out which led me to the door switch being the fault. I removed the switch and soldered the three wire together and the dryer started right up! All I had to do was order a new $15 part, unsolder the wires and plug them in. Would have been so much simpler if that light bulb hadn't of been burned out causing me to over think my diagnosis. This was my first major appliance repair and I did it with only the help of the parts diagram provided on the website.
