This door latch is designed for your dryer, and is mounted to the dryer frame. The door latch holds the door of your dryer closed while the machine is operating. If your dryer door is not catching on ...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Greg
December 8, 2022
what is the belt for this model
For model number GTDS820ED0WS
Hi Greg, thank you for reaching out. The part you are looking for is part number PS8756706. We hope this information helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
THE DRYER IS NOT DRYING. CUTS OFF DURING CYCLE ON HIGH HEAT AND SAYS DAMP COOL DOWN. CLOTHES COME OUT STILL WET TO TOUCH. TRIED ALL DIFFERENT SETTINGS. HAD VENTS CLEANED AND DRYER CHECKED AND GENTLEMAN CANNOT FIGURE OUT WHAT THE PROBLEM IS. PLEASE HELP
For model number GTDS820ED0WS
Hi Iris, thank you for your inquiry. We believe your dryer is having this problem because of the faulty high limit thermostat. We recommend you replace the high limit thermostat, part number PS8756900, to fix the issue. We hope this helps, good luck with this repair!
The start button stopped working. It’s getting power but it won’t start
For model number GTDS820ED0WS
Hi Michelle, thank you for the question. Based on our research, we would recommend checking the door switch first. If it is fine, the issue is most probably with the dryer control board, part number PS11736627. It manages the functions of the dryer such as drying time and temperature. You may need to replace it to fix the issue. We hope that helps!
The end repair was very simple and took minimal effort. The time and difficulty was all in the testing. I disassembled the dryer and removed the drum and then hard wired each thermo-fuse to determine where the fault was. After test all of those I was stumped. When I opened the door the light would not come on so I assumed it was a pow
... Read moreer fault closer to the source. However after all of my testing I couldn't find anything wrong. I then removed the light bulb and realized it was burned out which led me to the door switch being the fault. I removed the switch and soldered the three wire together and the dryer started right up! All I had to do was order a new $15 part, unsolder the wires and plug them in. Would have been so much simpler if that light bulb hadn't of been burned out causing me to over think my diagnosis. This was my first major appliance repair and I did it with only the help of the parts diagram provided on the website.
I removed the door and "flipped" it to open right to left. Rather than remove the existing door latch I added the purchased latch on the right side to enable opening the door right to left or left to right.
