This is a duct felt seal for a dryer. The duct felt seal allows the front-load dryer drum to glide smoothly on the front panel. Your dryer will not function properly if the drum felt seal is compromis...
$11.56
In Stock
Order within the next 1 hr and 36 mins and your part ships today!
This Drive Belt is 89.5" long and comes in black, featuring four ribs on the inside for a better grip. This is a long belt that wraps all the way around the dryer drum, around a tension pulley, and th...
$36.13
In Stock
Order within the next 1 hr and 36 mins and your part ships today!
This drum glide bearing is an authentic OEM replacement part that is compatible with dryers. It is white in color and made of highly durable plastic. The bearing allows the drum to rotate smoothly and...
$13.17
In Stock
Order within the next 1 hr and 36 mins and your part ships today!
This is the door switch for your dryer. Door switches are used to communicate with the control board when the door is fully closed, so the drying cycle can safely begin, and if it is opened so it can ...
$10.00
In Stock
Order within the next 1 hr and 36 mins and your part ships today!
This is a replacement O-ring for the drum bearing retainer on your dryer. The drum bearing is found at the back of the dryer drum. The O-ring is designed to create a seal on the drum bearing. The O-r...
$9.01
In Stock
Order within the next 1 hr and 36 mins and your part ships today!
This part is connected to the rear bulkhead of the dryer with screws. It provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).
$34.29
In Stock
Order within the next 1 hr and 36 mins and your part ships today!
Questions And Answers for GTD72EBSN0WS
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
15 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kent
September 18, 2022
Stopped heating do I need a thermostat or a sensor
For model number GTD72EBSN0WS
Hello Kent, thank you for reaching out. According to our research on model number GTD72EBSN0WS, the problem appears to be with the inlet thermostat, part number PS1766014. If that does not help then the issue is likely to be with the high limit thermostat, part number PS12073907. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair!
My dryer quit heating. I found out that the purple element wire on the lower left side of the heating assembly was burnt in half. Repaired the wire and 4 months later it burned in half again. What is causing this to happen?
For model number GTD72EBSN0WS
Hi Steve, thank you for reaching out. We have researched and found that the issue is possibly because of the loose connections at the heating elements terminals. We would recommend checking the connection. If that is not the case, then the terminals attached to the element could be damaged, and you may need to replace the heating element, part number PS8756702, to fix the issue. We hope this solves your problem!
Will not power on at all 240 running into dryer NO LIGHTS nor ANYTHING
For model number GTD72EBSN0WS
Hello Jonathan, thank you for contacting us. Please inspect the power cord and switch. If the power cord is good, two probable reasons can be behind such a problem: a blown fuse, part number PS10065161, and/or a problematic terminal block, part number PS1015628. Please inspect the terminal block for burned, broken, or frayed terminals before replacement. If you would like assistance placing an order, please contact customer service. Good luck with your repair!
Hello once again power cord terminal block checked out ok but I couldn't locate that fuse anywhere even after disassembling almost the whole dryer anymore help would really be appreciated...Thanks in advance
For model number GTD72EBSN0WS
Hi Jonathan, thank you for reaching out. We have researched your model and attached a relevant video that might help you with fuse replacement. We hope this is what you were looking for.
How many dryer glides are there? I need to replace them.
Thank you.
For model number GTD72EBSN0WS
Hello Stephanie, thank you for your inquiry. There are two glide bearings in your model, part numbers PS4704230 and PS16762550. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
Removed the front Dryer panel. Left drum in place and lifted it up slightly to get access to motor drive. Slipped belt in place and put panel back on. This was a first attempt ever at fixing an appliance and it was no big deal.
I had to take most of the dryer apart because there is no rear access to the motor. It turned out to be easy to dissasembel the dryer. The only problem that I had was that I could not figure out how to route the belt around the motor and the idol pullies. I could not find anywhere that gave instructions on how to properly tension the belt
... Read more. I finally figured out that the idoler pulley needs to be locked in place on the right side of the engie mount. Then the belt needs to be routed over idoler pulley and under the motor pulley. Finally release the idoler pully from the locked postion to put tension on the belt. It really turned out to be pretty easy.
Pryed off the top with a flat head screwdriver and removed the 2 screws holding the front panel to the sides. Then lifted the front panel off of the bottom brackets. Belt fit perfectly and followed the provided instructions to loop it around the motor and pulley. PartSelect got the part to me within a couple of days and the repair was a
... Read moresnap.
