Quick Question!

Have you ever purchased from PartSelect.com before?

Models > GT23B7N3EV

GT23B7N3EV Maytag Refrigerator - Overview

Get Parts and Repair Help for GT23B7N3EV

If you know the refrigerator repair part you need, you can browse the list of all parts on the GT23B7N3EV, or you can search by name or part description. You can also find your part by where it is located on the GT23B7N3EV by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for GT23B7N3EV parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$8.84

Door Shelf Retainer

Sold Individually.

$18.42

Leveling Leg

Sold individually.

$20.45

Temperature Control Knob

Sold individually.

$38.05

Lower Hinge Pin

This pin is used with the lower hinge assemblies of both the fresh food door and the freezer door of side by side refrigerators.

$10.01

Butter Dish

$2.80

Screw

Sold Individually.

Drawer Support Slide Rail - Left Side

Drawer Support Slide Rail - Right Side

Single Lamp Socket Kit

NOTE: This is now the single lamp kit socket. The dual lamp kit socket is no longer available.

Kickplate Clip

Sold Individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lights inside refrigerator not working

  • Customer: Clint from Rayville, MO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 55 of 67 people found this instruction helpful
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again. read more

The light switch on the refridgerator broke - no light.

  • Customer: David from Albany, OR
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 18 of 27 people found this instruction helpful
Once I saw the replacement part I understood how to pry out the switch with a small screwdriver. Then just unplug the old one, plug in the new one and pop it into place.

The PartSelect site made it easy to correctly identify the correct part, it was inexpensive, and the shipping was fast.

I'm very pleased! read more

Refrigerator (Top, non-freezer section) light switch broke & light socket bad with age.

  • Customer: Henry from Clinton Township, MI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 13 of 22 people found this instruction helpful
Turned off power to Refrigerator.
1)Removed broken light switch, using a screwdriver, to gently pry it out. Then unlugged the switch from the connector. I used long nosed pliers to gently pull out the connector from inside the frig, so I could easily plug in the new light switch. I then pressed the new light switch back in place.
2) Remove light ... read more