Models > GT2126PEKW

GT2126PEKW Maytag Refrigerator - Overview

Get Parts and Repair Help for GT2126PEKW

If you know the refrigerator repair part you need, you can browse the list of all parts on the GT2126PEKW, or you can search by name or part description. You can also find your part by where it is located on the GT2126PEKW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for GT2126PEKW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.70

Screw

Sold individually.

$2.70

SCREW

$14.89

Water Fill Cup and Bearing

$18.27

Light Switch

$3.96

Evaporator Fan Blade

This fan blade attaches to the evaporator fan motor which is located in the back of the freezer.

$3.96

Compression Nut

$28.19

Thermostat with Clips

This part is also known as the cycling thermostat and this bi-metal device controls the activation of the icemaker ejection cycle.

$2.70

Fan Blade Clamp

$3.56

Plastic Tubing

1/4" Plastic tubing, 8 1/2 feet long.

$3.82

Screw

This screw is sold individually

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The Bearing Cup Assembly was broken and ice would jamb against it during the ice making cycle.

  • Customer: David from Chester CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 63 of 76 people found this instruction helpful
I removed the ice maker from the refrigerator, by removing one screw on the underside bracket and loosening the two screws at the top side, then lifting the ice maker off the loosened screws. I then unplugged the electrical harness that supplies power from the refrigerator to the ice maker. I then disassembled the ice maker by removing the front cover whic... read more

No ice in ice trey

  • Customer: Wayne from Leesburg FL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 46 of 53 people found this instruction helpful
The easiest thing to do was pull the ice make off. After taking the 3 screws out of the wall of the freezer, take a screwdriver (flathead) and push on the tab for the electrical plug and wiggle the cord out. Then you can take 3 screws out for the main cover and another 2 screws on the next cover. There's the part, pop it out and replace holding pins and star... read more

Evaporator Fan making noise (as heard from freezer)

  • Customer: Timothy from Portland TX
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 20 of 20 people found this instruction helpful
If the fan blade needs replacement you will hear a loud noise coming from the refrigerator while the refrigerator cycles on. It will go away when it cycles off. (Note: in many cases you only need to replace the fan blade and retaining clip. Purchase both parts together. I thought I could use my old clip just to find out that the fan blade design changed ... read more