Models > GT2124NDEW

GT2124NDEW Maytag Refrigerator - Overview

Get Parts and Repair Help for GT2124NDEW

If you know the refrigerator repair part you need, you can browse the list of all parts on the GT2124NDEW, or you can search by name or part description. You can also find your part by where it is located on the GT2124NDEW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for GT2124NDEW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$8.27

Shelf Retainer Bar End Cap

Sold individually.

$3.76

Crisper Drawer Shelf Support

This crisper drawer shelf support is used for many refrigerators.

$2.70

Screw

This screw is sold individually.

$8.37

Light Rocker Switch

$2.70

SCREW

Sold individually.

$105.64

Fresh Food Door Gasket

This white gasket is used to seal the door when closed to keep the cool air inside and the room air out.

$4.46

Hinge Washer

$41.80

Lower Door Shelf Trim

$4.46

Lower Hinge Pin

This lower hinge pin is just over an inch long. It is black in color and is made of plastic. It is located on the bottom part of the door hinge.

$18.09

Cold Control Knob - Fresh Food

This knob is used to change the internal temperature of a refrigerator's fresh food section.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

cocktails running out of ice

  • Customer: Craig from Westminster CA
  • Difficulty: Very Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers, Socket set, Wrench set, Wrench(Adjustable)
  • 49 of 54 people found this instruction helpful
filled both ice cube trays up with water and placed in the freezer.. within hours my ice oproduction was doubled! no more warm cocktails : ) read more

Lights inside refrigerator not working

  • Customer: Clint from Rayville MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 34 of 41 people found this instruction helpful
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again. read more

The light switch on the refridgerator broke - no light.

  • Customer: David from Albany OR
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 16 of 23 people found this instruction helpful
Once I saw the replacement part I understood how to pry out the switch with a small screwdriver. Then just unplug the old one, plug in the new one and pop it into place.

The PartSelect site made it easy to correctly identify the correct part, it was inexpensive, and the shipping was fast.

I'm very pleased! read more