Quick Question!

Have you ever purchased from PartSelect.com before?

Models > GT1928PAHW

GT1928PAHW Maytag Refrigerator - Overview

Get Parts and Repair Help for GT1928PAHW

If you know the refrigerator repair part you need, you can browse the list of all parts on the GT1928PAHW, or you can search by name or part description. You can also find your part by where it is located on the GT1928PAHW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for GT1928PAHW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$5.05

Screw

Sold individually.

$5.15

Screw

This screw is sold individually.

$8.84

Crisper Drawer Shelf Support

This crisper drawer shelf support is used for many refrigerators. It is all white in color and is made entirely of plastic. This shelf support is less than an inch long.

$16.74

Water Fill Cup and Bearing

$12.51

Drawer Slide Rail - left side

This left side drawer slide rail is thirteen inches long. It is clear and made of plastic.

$32.12

Thermostat Order 542369 Cement

This part is also known as the cycling thermostat and this bi-metal device controls the activation of the icemaker ejection cycle.

$24.65

BLADE-FAN

The fan blade is used to blow air over the condenser.

$5.55

Hinge Washer

This hinge washer is an inch in diameter. It is all black in color and is made of plastic.

$7.60

Lower Hinge Pin

This lower hinge pin is just over an inch long. It is black in color and is made of plastic. It is located on the bottom part of the door hinge.

$2.80

Screw

Sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The Bearing Cup Assembly was broken and ice would jamb against it during the ice making cycle.

  • Customer: David from Chester, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 91 of 110 people found this instruction helpful
I removed the ice maker from the refrigerator, by removing one screw on the underside bracket and loosening the two screws at the top side, then lifting the ice maker off the loosened screws. I then unplugged the electrical harness that supplies power from the refrigerator to the ice maker. I then disassembled the ice maker by removing the front cover whic... read more

No ice in ice trey

  • Customer: Wayne from Leesburg, FL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 72 of 85 people found this instruction helpful
The easiest thing to do was pull the ice make off. After taking the 3 screws out of the wall of the freezer, take a screwdriver (flathead) and push on the tab for the electrical plug and wiggle the cord out. Then you can take 3 screws out for the main cover and another 2 screws on the next cover. There's the part, pop it out and replace holding pins and star... read more

cocktails running out of ice

  • Customer: Craig from Westminster, CA
  • Difficulty: Very Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
  • 51 of 56 people found this instruction helpful
filled both ice cube trays up with water and placed in the freezer.. within hours my ice oproduction was doubled! no more warm cocktails : ) read more