Quick Question!

Have you ever purchased from PartSelect.com before?

Models > GT1826PEKQ

GT1826PEKQ Maytag Refrigerator - Overview

Get Parts and Repair Help for GT1826PEKQ

If you know the refrigerator repair part you need, you can browse the list of all parts on the GT1826PEKQ, or you can search by name or part description. You can also find your part by where it is located on the GT1826PEKQ by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for GT1826PEKQ parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

Order within the next 8 hrs and your part ships today!
$7.77

Lower Hinge Pin

This pin is used on the lower refrigerator door hinge.

$4.63

Screw

This screw is sold individually

Order within the next 8 hrs and your part ships today!

Evaporator Fan Blade

This fan blade attaches to the evaporator fan motor which is located in the back of the freezer.

$10.87

Fan Blade Clamp

Order within the next 8 hrs and your part ships today!
$11.92

Hinge Washer

$25.75

HINGE-LOWE

Order within the next 8 hrs and your part ships today!
$5.26

Cord Clip

Order within the next 8 hrs and your part ships today!

Sensor Shut-Off Arm

This part signals the icemaker to stop making ice once the bin has reached a desired amount.

$25.08

HINGE- UPP

Order within the next 8 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The Bearing Cup Assembly was broken and ice would jamb against it during the ice making cycle.

  • Customer: David from Chester, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 90 of 108 people found this instruction helpful
I removed the ice maker from the refrigerator, by removing one screw on the underside bracket and loosening the two screws at the top side, then lifting the ice maker off the loosened screws. I then unplugged the electrical harness that supplies power from the refrigerator to the ice maker. I then disassembled the ice maker by removing the front cover whic... read more

No ice in ice trey

  • Customer: Wayne from Leesburg, FL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 70 of 82 people found this instruction helpful
The easiest thing to do was pull the ice make off. After taking the 3 screws out of the wall of the freezer, take a screwdriver (flathead) and push on the tab for the electrical plug and wiggle the cord out. Then you can take 3 screws out for the main cover and another 2 screws on the next cover. There's the part, pop it out and replace holding pins and star... read more

Evaporator Fan making noise (as heard from freezer)

  • Customer: Timothy from Portland, TX
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 29 of 29 people found this instruction helpful
If the fan blade needs replacement you will hear a loud noise coming from the refrigerator while the refrigerator cycles on. It will go away when it cycles off. (Note: in many cases you only need to replace the fan blade and retaining clip. Purchase both parts together. I thought I could use my old clip just to find out that the fan blade design changed ... read more