GSL25JFRFBS General Electric Refrigerator - Instructions

The repair is a snap, you can watch the video and it will put you on the right path. My story is more about the service that Part Select gave me. I used a small box fan on low as a temporary fix. My model number was worn off from the box wine we store in that particular place. So I ordered the part based on looks, well it was wrong. Called Part Select and we talked, the nice lady on the other end said OH it must be this fan motor. Send us back that one, and I'll get this out too you. I'll credit your account for $7.99, and it cost me $8.99 to ship back the wrong part. Wow, the next day I received the new motor. They sent it overnight! I thought it would be 5-6 days! Unbelievable. I will use this company for any, and all my repairs.

Replace old auger with new one.

Watched your videos, ordered the parts, installed them and wallah, it is working great.

Removed power, removed control panel cover, removed control board, installed new control board.

I watched the video and then read the instructions. Emptied and cleaned freezer compartment. Removed old unit and removed part of old unit to be used in new installation. I then installed the new unit and turned the water back on. I let the unit produce over night and through the first batch of ice away. Because of the various regrigerators this ice maker was used I had a little confusion recognizing our model, but worked through this problem useing some common sense. All around I'm very satisfied with the results.

Simple easy to follow instruction, very easy removal and installation. But for someone without mechanical skill, I dont see it being as easy as it was for me.

I determined that the auger was broken. But with company coming in a week I did not want to take a chance with needing additional parts. I simply ordered the whole assembly. It arrived in plenty of time and installing it was easy. Take it out of the box, rinse it out with warm soap and water, dry it out, remove the old bucket and slide the new one in its place. Absolutely no problem! I was surprised on how well the new ice dispenser worked after the swap. My old one must have been broken for some time.

When I clicked on the part to see it's description the pop up window included a youtube video on how to install the part. The video was right on the mark. Very easy installation. Phillips screwdriver was the only tool needed. Repair performed in less than 15 minutes. I have used this site before and it has been extremely helpful in saving me money by doing the repairs myself instead of paying an arm and a leg for a repairman to do it.

We had been told at some point the main control board would need replacement, due to various system issues with the refrigerator. The total repair cost would have been close to $400. The cost of the board was less than half of that cost. The instructions provided by PartSelect were very good. There was also a video of a similar model of refrigerator that outlined and showed every thing step by step. I removed the screws from the access panel in the back of the unit. unplugged the electrical plugs, removed the board. Installed the new board, reinstalled the plugs (all were idiot proof as PartSelect indicated), reinstalled the access panel and plugged the refrigerator back in. It has worked like new since install. This is an excellent website and service. I will use it again as needed with all my appliances.

I ordered the part and was sent a link to a video that did a great step by step visual of the repair. I had my laptop and played the video ( paused a few times to catch up) and had the repair done within an about 30-45 minutes. The video covered everything that needed to be done it was great.

Quite easy. Turn off water supply and turn off ice maker at switch inside freezer. Unscrew the old unit, separate the electrical connection, and pull it out. New unit comes with parts that do not fit my refrigerator, so visually examine the new and old units, reuse any needed parts from the old unit, such as plastic water ramp. Reconnect the electrical connector, and screw it back in. Turn water supply back on and then turn ice maker back on at switch inside freezer. Discard unused parts. Wait up to 24 hours for new ice cubes to be made.

Removed the cover installed parts. Parts were very simple cover was a major problem. Instructions stated "simply remove cover by pushing on cover and clips will release" They dont and cover broke.

Removed lower back grill panel with 5/16th nut driver, removed water valve with nut driver, removed inlet water line with adjustable wrench, removed two water oulet lines by pushing in bushings and pulling on water lines by hand. installed new water valve and attached water lines, secured new valve to back of fridge and re-attached back panel.

The repair was hard because the nut holding the auger to the icemaker was reverse thread. If you tried to get it off the normal way, you just continued to tighten it up and therefore the assembly wouldn't come apart. Once I figured that out there was a number of screws that held the housing to the icemaker that had to be removed. Putting it all back together was reasonably straightforward. Put the assembly back into the refrigerator and it started making ice cubes in about an hour.

Used your, diagnostic chart,whatched associated video and replaced thermostat. Easy , simple and cheap!!! I am thrilled with the website and service you provide. I definately will be back for more repairs as they arise. THANK YOU !!!!!