Parts That Fix General Electric Refrigerator GSE25HSHJHSS Light not working
Light not working is a commonly reported symptom for the GSE25HSHJHSS General Electric Refrigerator, and we have put together a full guide on how to fix this.
This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your GSE25HSHJHSS General Electric Refrigerator that will fix Light not working.
We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
This is the light switch that goes in your refrigerator. If the light is not working or stays on, you may need to replace the switch. It is made of mainly white plastic, and is an OEM part, directly from the manufacturer. Be sure to disconnect the refrigerator from the power source before you begin this repair. To remove the switch, simply use a flathead screwdriver to pop the switch out from the refrigerator wall, then disconnect the wires. Reconnect the wires to the new switch, snap it into place, and the repair is complete.
This is a LED light board assembly, used within refrigerators to shine light on the contents and food items within. If the light panel in your fridge is significantly dimmed or dead, it needs to be replaced immediately. To replace this light board, simply gain access to it within your fridge, disconnect and remove the wire harness from it, and slide it off its securing posts, and then place the new one in. This OEM LED light board is sold individually, so depending on how many light boards are out in your fridge, consider that before ordering.
