Models > GS6SHEXNS00

GS6SHEXNS00 Whirlpool Refrigerator - Overview

Get Parts and Repair Help for GS6SHEXNS00

If you know the refrigerator repair part you need, you can browse the list of all parts on the GS6SHEXNS00, or you can search by name or part description. You can also find your part by where it is located on the GS6SHEXNS00 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for GS6SHEXNS00 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.58

Light Bulb - 40W

Sold individually.

Order within the next 8 hrs and your part ships today!
$14.20

Pan Slide Track

This part can be used for either the left or right side of the pan.

Order within the next 8 hrs and your part ships today!
$5.61

Lower Door Closing Cam

This door closing cam is located on the bottom of the fridge/freezer.

Order within the next 8 hrs and your part ships today!
$65.88

Ice and Water Filter

This filter is mounted in the bottom grille. Sold individually.

Order within the next 8 hrs and your part ships today!
$112.25

Ice Maker Assembly - 8 Cube

This icemaker can be used with 25-27 cubic feet refrigerators that have a vertical auger dispenser located on the freezer door. Reuse bottom bracket from the original icemaker and...

Order within the next 8 hrs and your part ships today!
$67.70

Water Inlet Valve

Note: This valve has been updated by the manufacturer and NO longer includes the removable pre-filter bracket connector. Must be ordered separately on PS3502196

Order within the next 8 hrs and your part ships today!
$5.74

Door Cam - Black

Note: As per manufacture a new screw is needed to mount door cam. Sold individually.

Order within the next 8 hrs and your part ships today!
$7.77

Ice Guide

This ice guide is located in the freezer door.

Order within the next 8 hrs and your part ships today!
$66.61

Icemaker Control Assembly

This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. Motor is not sold separately.

Order within the next 8 hrs and your part ships today!
$50.65

Ice Door Kit

This kit includes the ice door, support, spring and delay. The heater ribbon is no longer attached - the heater is no longer needed.

Order within the next 8 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Replaced Two Broken Tracks

  • Customer: Steve from Milton GA
  • Difficulty: Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 490 of 493 people found this instruction helpful
The old tracks had been falling out consistently, causing the deli tray to fall on top of the food below it (which included the eggs, though none were broken since they were in a hard plastic container).

I had some difficulty getting the new track installed, however. All the parts lined up, but I just couldn't get the tracks to slide into place. ... read more

Front wheel was broken when moving refrigerator

  • Customer: Jeff from Midway GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 471 of 478 people found this instruction helpful
Lifted the front up onto a scrap 2x4 to get it off the ground and it had 1 bolt that you removed to get the old item off and replace with new assymbly and 1 bolt to re attach. This sat broke for over a year becuase I thought it would be alot harder to fix, found the part on parts select ordered it recieved it in approx 2 days and had it fixed in less than 15... read more

No ice

  • Customer: Daniel from Suwanee GA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 369 of 440 people found this instruction helpful
removed flap door in front of icemaker...removed 3 screws with bolt heads...removed one additional screw with bolt head and ice unit slid out. I removed motor unit (pops out no screws). Replaced and had ice within 3 hours. read more