Quick Question!

Have you ever purchased from PartSelect.com before?

Models > GS458LEMT0

GS458LEMT0 Whirlpool Range - Overview

Get Parts and Repair Help for GS458LEMT0

If you know the range repair part you need, you can browse the list of all parts on the GS458LEMT0, or you can search by name or part description. You can also find your part by where it is located on the GS458LEMT0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for GS458LEMT0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

$5.15

SCREW

Sold individually.

$7.20

Touch-Up Paint - White

18ml

$19.88

Single Drawer Roller

Used to slide the broiler drawer open and closed.

$11.07

Spray Paint - 12 oz. - White

$7.20

Touch-Up Paint - .6fl Ounce - Biscuit

$71.90

Bake Burner with Spark Igniter

The igniter is ONLY available with this assembly. The igniter is NOT sold separately.

$74.52

Door Handle - Biscuit

NOTE: As per the manufacture, the door handle has been redesign and now requires new mounting screws. The old handle was threaded and the updated handle is not.

$12.25

Anti-Tip Bracket Kit

This kit keeps your appliance from tipping. Comes with bracket, ring and 2 screws.

$15.18

Control Knob - White

Sold individually. This knob accepts a D-shaped shaft.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

oven wouldn't heat

  • Customer: Ignatius from Hazelwood, MO
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Wrench (Adjustable)
  • 79 of 85 people found this instruction helpful
My oven was misdiagnosed from an appliance repair company. They said my ignitors and spark module needed to be replaced. I did this myself and still nothing. The problem happened to be a defective gas valve.

First I unplugged the stove and shut off the gas supply. After I disconnected the flex hose and the 2 gas connections behind the stove, I... read more

temperature not accurate after 3 1/2 years of happy usage

  • Customer: Ruth from Oregon, IL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 85 of 150 people found this instruction helpful
Opened up the back of the stove. Unpluged the sensor. Replaced the sensor. Replace the back of the stove.

The sensor that has been replaced is not what is expected. After reading all of the instructions for adjusting the temperatures, the only temp that stays steady is when we first turn on the oven to 350 degrees. That stays steady but when I tur... read more

Replace shattered outer door glass

  • Customer: Philip from Vandalia, MI
  • Difficulty: A Bit Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 42 of 51 people found this instruction helpful
This is not the best design. You'll need to have an extra set of hands to hold the trim pieces in place. Remember the glass is positioned outside [on top of]the trim pieces. Be careful as the trim pieces are rather brittle and can be hard to locate in their proper position. Position glass in the holding tabs at the bottom, hold glass against the trim piece... read more