Models > GS440LEMQ3

GS440LEMQ3 Whirlpool Range - Overview

Get Parts and Repair Help for GS440LEMQ3

If you know the range repair part you need, you can browse the list of all parts on the GS440LEMQ3, or you can search by name or part description. You can also find your part by where it is located on the GS440LEMQ3 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for GS440LEMQ3 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.52

Light Bulb - 40W

Sold individually.

$2.70

Torx Screw

7-18 x 3/4" - sold individually.

$37.24

Bake Igniter

$3.76

Rear Drawer Glide

$2.70

Screw

This screw is sold individually.

$3.96

Front Drawer Glide

Sold individually.

$2.70

Igniter Screw

This screw is sold individually.

$43.62

Oven Rack

Sold individually.

$5.54

Touch-Up Paint - White

$16.04

Surface Burner Spark Igniter

This part helps your burner ignite and produce flame.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

oven wouldn't heat

  • Customer: Ignatius from Hazelwood MO
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Wrench(Adjustable)
  • 48 of 50 people found this instruction helpful
My oven was misdiagnosed from an appliance repair company. They said my ignitors and spark module needed to be replaced. I did this myself and still nothing. The problem happened to be a defective gas valve.

First I unplugged the stove and shut off the gas supply. After I disconnected the flex hose and the 2 gas connections behind the stove, I... read more

Bake/broil would not work

  • Customer: Greg from North Baltimore OH
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Wrench(Adjustable)
  • 32 of 50 people found this instruction helpful
Replaced igniter and also DSI/direct spark igniter did not fix problem. Called out repairman turned out to be bad gas valve. Replaced that part , now stove works fine. read more

temperature not accurate after 3 1/2 years of happy usage

  • Customer: Ruth from Oregon IL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 39 of 85 people found this instruction helpful
Opened up the back of the stove. Unpluged the sensor. Replaced the sensor. Replace the back of the stove.

The sensor that has been replaced is not what is expected. After reading all of the instructions for adjusting the temperatures, the only temp that stays steady is when we first turn on the oven to 350 degrees. That stays steady but when I tur... read more