Quick Question!

Have you ever purchased from PartSelect.com before?

Models > GS440LELQ0

GS440LELQ0 Whirlpool Range - Overview

Get Parts and Repair Help for GS440LELQ0

If you know the range repair part you need, you can browse the list of all parts on the GS440LELQ0, or you can search by name or part description. You can also find your part by where it is located on the GS440LELQ0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for GS440LELQ0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

$5.15

SCREW

Sold individually.

$7.20

Touch-Up Paint - White

18ml

$36.13

Oven Door Trim Kit

This white oven door trim set contains three pieces: two for the sides of the door and one for the bottom. The screws are sold separately.

$39.18

Door Trim Kit - Black

This kit includes the 2 side pieces and 1 bottom piece. NOTE: This kit has been updated by the manufacturer. The lower screws are no longer needed for the side trim now locks in to...

$11.07

Spray Paint - 12 oz. - White

$7.20

Touch-Up Paint - .6fl Ounce - Biscuit

$71.90

Bake Burner with Spark Igniter

The igniter is ONLY available with this assembly. The igniter is NOT sold separately.

$35.18

TRIM-DOOR - Bisque

Includes the 2 side trim and 1 bottom trim - Redesigned parts per Manufacturer.

$74.52

Door Handle - Biscuit

NOTE: As per the manufacture, the door handle has been redesign and now requires new mounting screws. The old handle was threaded and the updated handle is not.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

oven wouldn't heat

  • Customer: Ignatius from Hazelwood, MO
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Wrench (Adjustable)
  • 79 of 85 people found this instruction helpful
My oven was misdiagnosed from an appliance repair company. They said my ignitors and spark module needed to be replaced. I did this myself and still nothing. The problem happened to be a defective gas valve.

First I unplugged the stove and shut off the gas supply. After I disconnected the flex hose and the 2 gas connections behind the stove, I... read more

temperature not accurate after 3 1/2 years of happy usage

  • Customer: Ruth from Oregon, IL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 85 of 150 people found this instruction helpful
Opened up the back of the stove. Unpluged the sensor. Replaced the sensor. Replace the back of the stove.

The sensor that has been replaced is not what is expected. After reading all of the instructions for adjusting the temperatures, the only temp that stays steady is when we first turn on the oven to 350 degrees. That stays steady but when I tur... read more

E1 F5 Error on display

  • Customer: Gregory from Thornton, CO
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 31 of 38 people found this instruction helpful
After reading many forums found that this error happens when trying to clean the oven and there is a failure in the latch motor to lock the oven door. It was suggested 1st to just tunr the breaker off to the over wait and then turn it back on to see if the error would clear by itself. If not then you'll have to do what I did and buy a new Latch Motor and r... read more