Models > GS395LEHS6

GS395LEHS6 Whirlpool Range - Overview

Get Parts and Repair Help for GS395LEHS6

If you know the range repair part you need, you can browse the list of all parts on the GS395LEHS6, or you can search by name or part description. You can also find your part by where it is located on the GS395LEHS6 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for GS395LEHS6 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.52

Light Bulb - 40W

Sold individually.

$2.70

Torx Screw

7-18 x 3/4" - sold individually.

$3.76

Rear Drawer Glide

$2.70

Screw

This screw is sold individually.

$28.25

Oven Temperature Sensor

This oven temperature sensor is used with self cleaning ovens. Its 1000 ohm resistance increases with temperature. This sensor has male leads and comes with ceramic wire nuts.

$3.96

Front Drawer Glide

Sold individually.

$2.70

Igniter Screw

This screw is sold individually.

$43.62

Oven Rack

Sold individually.

$5.54

Touch-Up Paint - White

$16.04

Surface Burner Spark Igniter

This part helps your burner ignite and produce flame.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

F3 Error message

  • Customer: Charles from Brecksville OH
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 79 of 101 people found this instruction helpful
Two screws remove the front of the sensor (put a pan under the sensor to catch the screws), One nut removes the rear cover to access the rear of the sensor. Separating the two halves of wiring harness takes a little dexterity. BIG TIP! Tie a string to the back of the sensor wire and pull the sensor out from the front making sure the string still shows thru t... read more

oven wouldn't heat

  • Customer: Ignatius from Hazelwood MO
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Wrench(Adjustable)
  • 53 of 55 people found this instruction helpful
My oven was misdiagnosed from an appliance repair company. They said my ignitors and spark module needed to be replaced. I did this myself and still nothing. The problem happened to be a defective gas valve.

First I unplugged the stove and shut off the gas supply. After I disconnected the flex hose and the 2 gas connections behind the stove, I... read more

E1 F5 Error on display

  • Customer: Gregory from Thornton CO
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 19 of 26 people found this instruction helpful
After reading many forums found that this error happens when trying to clean the oven and there is a failure in the latch motor to lock the oven door. It was suggested 1st to just tunr the breaker off to the over wait and then turn it back on to see if the error would clear by itself. If not then you'll have to do what I did and buy a new Latch Motor and r... read more