Quick Question!

Have you ever purchased from PartSelect.com before?

Models > GS395LEGQ7

GS395LEGQ7 Whirlpool Range - Overview

Get Parts and Repair Help for GS395LEGQ7

If you know the range repair part you need, you can browse the list of all parts on the GS395LEGQ7, or you can search by name or part description. You can also find your part by where it is located on the GS395LEGQ7 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for GS395LEGQ7 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.07

Light Bulb - 40W

Sold individually.

$11.72

Control Knob

This knob accepts a D-shaped shaft. Sold individually.

$2.76

Torx Screw

7-18 x 3/4" - sold individually.

$12.00

Control Knob

This knob accepts a D-shaped shaft. Sold individually.

$5.15

Screw

This screw is sold individually.

$40.81

Oven Rack

Sold individually.

$14.22

Surface Burner Spark Igniter

This part helps your burner ignite and produce flame.

$7.60

Rear Drawer Glide

$5.15

Screw

Sold individually. Lock washers are used with screws when vibration from an appliance may cause the screw to loosen. Lock washers are also used in the electrical components of an ...

$5.15

Screw, Igniter

This screw is sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

oven wouldn't heat

  • Customer: Ignatius from Hazelwood, MO
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Wrench (Adjustable)
  • 81 of 89 people found this instruction helpful
My oven was misdiagnosed from an appliance repair company. They said my ignitors and spark module needed to be replaced. I did this myself and still nothing. The problem happened to be a defective gas valve.

First I unplugged the stove and shut off the gas supply. After I disconnected the flex hose and the 2 gas connections behind the stove, I... read more

E1 F5 Error on display

  • Customer: Gregory from Thornton, CO
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 34 of 41 people found this instruction helpful
After reading many forums found that this error happens when trying to clean the oven and there is a failure in the latch motor to lock the oven door. It was suggested 1st to just tunr the breaker off to the over wait and then turn it back on to see if the error would clear by itself. If not then you'll have to do what I did and buy a new Latch Motor and r... read more

Socket Light had a bad thread

  • Customer: Edmund from Emporium, PA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 34 of 46 people found this instruction helpful
Socket Lite come with clips attached to the outside
of the housing. After you unhook the 3 lead wires
that are attached to the unit. All you have to do is push in on the clips and release the unit. Then you
snap in the new unit. Attach the 3 wire leads, put a
oven bulb in the socket end, and the install the light cover read more