Models > GS395LEGB6

GS395LEGB6 Whirlpool Range - Overview

Get Parts and Repair Help for GS395LEGB6

If you know the range repair part you need, you can browse the list of all parts on the GS395LEGB6, or you can search by name or part description. You can also find your part by where it is located on the GS395LEGB6 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for GS395LEGB6 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.52

Light Bulb - 40W

Sold individually.

$12.97

Control Knob

This knob accepts a D-shaped shaft. Sold individually.

$2.70

Torx Screw

7-18 x 3/4" - sold individually.

$14.98

Control Knob

This white knob can accept a D-shaped shaft. Sold individually.

$2.70

Screw

This screw is sold individually.

$3.76

Rear Drawer Glide

$3.96

Front Drawer Glide

Sold individually.

$28.25

Temperature Sensor

This temperature sensor is used with self cleaning ovens. Its 1000 ohm resistance increases with temperature. This sensor has male leads and comes with ceramic wire nuts.

$13.81

Surface Burner Spark Igniter

This part helps your burner ignite and produce flame.

$43.62

Oven Rack

Sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

F3 Error message

  • Customer: Charles from Brecksville OH
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 90 of 115 people found this instruction helpful
Two screws remove the front of the sensor (put a pan under the sensor to catch the screws), One nut removes the rear cover to access the rear of the sensor. Separating the two halves of wiring harness takes a little dexterity. BIG TIP! Tie a string to the back of the sensor wire and pull the sensor out from the front making sure the string still shows thru t... read more

oven wouldn't heat

  • Customer: Ignatius from Hazelwood MO
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Wrench(Adjustable)
  • 62 of 66 people found this instruction helpful
My oven was misdiagnosed from an appliance repair company. They said my ignitors and spark module needed to be replaced. I did this myself and still nothing. The problem happened to be a defective gas valve.

First I unplugged the stove and shut off the gas supply. After I disconnected the flex hose and the 2 gas connections behind the stove, I... read more

the spark ignitter

  • Customer: Thomas from Lowell MI
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 22 of 32 people found this instruction helpful
The spark igniter will not restart it self. Ordered the part and was very easy to put in ( 6 screws ) saved me over $100.00 in laber and parts. I also was told that the spark igniter was not sold by it self and they were wrong, you can buy it on line at Part select . com Thank you read more