Quick Question!

Have you ever purchased from PartSelect.com before?

Models > GS2126PEDA

GS2126PEDA Maytag Refrigerator - Overview

Get Parts and Repair Help for GS2126PEDA

If you know the refrigerator repair part you need, you can browse the list of all parts on the GS2126PEDA, or you can search by name or part description. You can also find your part by where it is located on the GS2126PEDA by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for GS2126PEDA parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$25.56

BLADE-FAN

The fan blade is used to blow air over the condenser.

Order within the next 9 hrs and your part ships today!
$7.40

Natural Door Closer

Order within the next 9 hrs and your part ships today!
$20.78

Icemaker Fill Tube

This fill tube grommet is used to supply water to the icemaker and is partially located in the refrigerator/freezer wall.

Order within the next 9 hrs and your part ships today!
$71.01

Crisper Drawer

Order within the next 9 hrs and your part ships today!
$63.81

Meat Pan

Order within the next 9 hrs and your part ships today!
$5.41

Upper Hinge Shim

This upper hinge shim is just under two inches long. It is beige in color and is made of a thick paper. This shim is intended for use with refrigerator hinge assemblies.

Order within the next 9 hrs and your part ships today!
$39.60

Door Shelf

Sold individually.

Order within the next 9 hrs and your part ships today!
$9.94

Butter Dish

Order within the next 9 hrs and your part ships today!
$5.26

Cord Clip

$34.36

Damper Door Spring

This spring is sold individually.

Order within the next 9 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The Bearing Cup Assembly was broken and ice would jamb against it during the ice making cycle.

  • Customer: David from Chester, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 90 of 106 people found this instruction helpful
I removed the ice maker from the refrigerator, by removing one screw on the underside bracket and loosening the two screws at the top side, then lifting the ice maker off the loosened screws. I then unplugged the electrical harness that supplies power from the refrigerator to the ice maker. I then disassembled the ice maker by removing the front cover whic... read more

No ice in ice trey

  • Customer: Wayne from Leesburg, FL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 70 of 80 people found this instruction helpful
The easiest thing to do was pull the ice make off. After taking the 3 screws out of the wall of the freezer, take a screwdriver (flathead) and push on the tab for the electrical plug and wiggle the cord out. Then you can take 3 screws out for the main cover and another 2 screws on the next cover. There's the part, pop it out and replace holding pins and star... read more

Lights inside refrigerator not working

  • Customer: Clint from Rayville, MO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 55 of 66 people found this instruction helpful
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again. read more