Quick Question!

Have you ever purchased from PartSelect.com before?

Models > GR563LXSS2

GR563LXSS2 Whirlpool Range - Overview

Get Parts and Repair Help for GR563LXSS2

If you know the range repair part you need, you can browse the list of all parts on the GR563LXSS2, or you can search by name or part description. You can also find your part by where it is located on the GR563LXSS2 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for GR563LXSS2 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

$5.15

SCREW

Sold individually.

$7.20

Touch-Up Paint - White

18ml

$39.18

Door Trim Kit - Black

This kit includes the 2 side pieces and 1 bottom piece. NOTE: This kit has been updated by the manufacturer. The lower screws are no longer needed for the side trim now locks in to the lower trim piece.

$20.14

Door Trim - Right Side - Black

$11.07

Spray Paint - 12 oz. - White

$42.04

Door Trim - Left Side - Black

$7.20

Touch-Up Paint - .6fl Ounce - Biscuit

$5.15

SCREW

Sold individually.

$4.89

CLIP

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Radiant element, 2400 watt, under Ceran glass cok top needed replacement.

  • Customer: GEORGE from NEWNAN, GA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 113 of 184 people found this instruction helpful
turned off power
removed ceran top from cabinet
removed element
installed new element
replaced top
powered up and was done read more

Hot Burner Light always on

  • Customer: Gregory from Cary, NC
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 72 of 104 people found this instruction helpful
Thermal switch is integral to element and can not be changed, must replace entire element.

Turn off power. Removed front two screws above oven door jamb and lifted the top. Removed the bracket that holds the element against the glass top and removed the element. Moved brackets from old element to new one, aligning to same numerical position and th... read more

temperature not accurate after 3 1/2 years of happy usage

  • Customer: Ruth from Oregon, IL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 85 of 150 people found this instruction helpful
Opened up the back of the stove. Unpluged the sensor. Replaced the sensor. Replace the back of the stove.

The sensor that has been replaced is not what is expected. After reading all of the instructions for adjusting the temperatures, the only temp that stays steady is when we first turn on the oven to 350 degrees. That stays steady but when I tur... read more