Order within the next 10 hrs and your part ships today!
Questions And Answers for GPT225SGL0WW
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Linda
December 26, 2023
Leaking water from bottom of door
For model number GPT225SGL0WW
Hi Linda, thank you for your inquiry. Based on our research, the issue is with the lower door seal. But the lower door seal is not sold separately. You may need to replace the entire inner door assembly, part number PS12582793, to fix the issue. Glad to be of assistance!
What else is something I can look for This will be the 2nd water pump in 3 weeks We'll not drain After it runs its cycle
For model number GPT225SGL0WW
Hello Brian, thank you for reaching out. According to our research, we would recommend checking the following parts to fix your issue: fine filter, part number PS12582698, coarse filter, part number PS12582692, and control board, part number PS12582725. Customer service is available 7 days a week if you need help placing an order. Glad to be of assistance!
Hello Tony, thank you for your inquiry. We have researched and found that the error code 888 indicates a problem with the control board. We would recommend resetting the appliance by unplugging it for 1 minute and then plugging back in. If the error code remains, then you may need to check the control board, part number PS12582725, to solve the problem. Glad to be of assistance!
*UNPLUG THE DISHWASHER *remove 2 mounting screws attatching dishwasher to underside of countertop. *with the dishwasher door closed, remove left and right side hinge cables off pulley and hinge. *fully open door and remove all perimeter screws except for 2 screws holding the latch assembly. *carefully separate outer
... Read more door shell from door body. *disconnect electrical clip from inside top of outer shell. Carefully set outer shell aside. *each hinge has 2 Torx head screws and 2 Phillips head screws, remove these. You can now slide the door body out and away from the hinges and dishwasher. *these hinges were slightly bent so I had to use a ball peen hammer to tap them off the post. To reassemble, reverse these instructions.
