Models > GMC920G*1191

GMC920G*1191 General Electric Dishwasher - Overview

Sections of the GMC920G*1191

[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
Silverware Basket (Grey) – Part Number: WD28X265
Silverware Basket (Grey)
★★★★★
★★★★★
(29)
PartSelect #: PS261346
Manufacturer #: WD28X265
The silverware basket, used for dishwashers, is in the bottom of the dishrack. The basket is used to hold eating utensils such as spoons, forks, and knives. If the basket is worn out or broken, you sh...
$91.04
  In Stock
Piston and Nut Assembly – Part Number: WD24X10018
Piston and Nut Assembly
★★★★★
★★★★★
(19)
PartSelect #: PS260690
Manufacturer #: WD24X10018
This is used for the check valve.
$24.34
  In Stock
Rinse Aid Fill Cap – Part Number: WD12X10284
Rinse Aid Fill Cap
★★★★★
★★★★★
(11)
PartSelect #: PS2351824
Manufacturer #: WD12X10284
This part helps keep the rinse aid the dispenser until its needed.
$18.37
  In Stock
Water Inlet Valve – Part Number: WD15X93
Water Inlet Valve
★★★★★
★★★★★
(8)
PartSelect #: PS259411
Manufacturer #: WD15X93
This water inlet valve is specially designed for those dishwashers that fit under the counter from 1974 To Present. The valve should be located behind the lower kickplate panel in either the right or ...
$57.50
  In Stock
Upper Spray Arm Water Supply Hose – Part Number: WD24X214
Upper Spray Arm Water Supply Hose
★★★★★
★★★★★
(6)
PartSelect #: PS260738
Manufacturer #: WD24X214
This is the replacement upper spray arm water supply hose for dishwasher. It is made of white plastic and has a connector piece on each end. This hose supplies water to the upper spray arm, so it can ...
  No Longer Available
Third Level Spray Arm – Part Number: WD28X10103
Third Level Spray Arm
★★★★★
★★★★★
(5)
PartSelect #: PS755622
Manufacturer #: WD28X10103
Water is forced through this spray arm by the unit's pump and motor assembly. The force of the water propels the spray arms, spraying water and detergent onto the dishes on the dishrack. This spray ar...
$86.81
  In Stock
Valve Body Gasket – Part Number: WD8X219
Valve Body Gasket
PartSelect #: PS263956
Manufacturer #: WD8X219
  No Longer Available
Hose Clamp Kit – Part Number: WH1X2036
Hose Clamp Kit
★★★★★
★★★★★
(2)
PartSelect #: PS270806
Manufacturer #: WH1X2036
This is a water hose clamp kit for a variety of appliances including dishwashers and washers. This is a genuine replacement part. The kit includes two hose clamps. The smaller of the two is 1 inch in ...
$15.89
  In Stock
Door Latch Knob – Part Number: WD9X351
Door Latch Knob
★★★★★
★★★★★
(3)
PartSelect #: PS264113
Manufacturer #: WD9X351
This knob is attached to the dishwasher door latch mechanism.
$12.28
  In Stock
Washer Package of 12 – Part Number: WH2X42D
Washer Package of 12
PartSelect #: PS271567
Manufacturer #: WH2X42D
$8.06
  On Order
Screws - 12 per package – Part Number: WZ4X241D
Screws - 12 per package
PartSelect #: PS312570
Manufacturer #: WZ4X241D
Size - 8-18 ab
$20.05
  In Stock
SCREW – Part Number: WD2X248
SCREW
PartSelect #: PS261455
Manufacturer #: WD2X248
$8.06
  Special Order

Questions And Answers for GMC920G*1191

Be the first to ask our experts a question about this model!

Common Symptoms of the GMC920G*1191

[Viewing 7 of 7]
Not draining
Fixed by
these parts
Fixing Fixing Fixing
Show All
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Not cleaning dishes properly
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not fill with water
Fixed by
these parts
Fixing
Show All
Will not dispense detergent
Fixed by
these parts
Fixing
Show All
Not drying dishes properly
Fixed by
these parts
Fixing
Show All
Door latch failure
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dishwasher wouldn't fully drain
I removed the four screws holding the screen and molded plastic cage inside the rear of the dishwasher to expose the check valve assembly. I then unscrewed the piston and nut assembly with my hand and replaced it with the new one. I found that the rubber cone shaped valve on the old piston and nut assembly was entirely disintegrated. This easy repair solved the problem.
Parts Used:
Piston and Nut Assembly
  • Dan from Minnetonka, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
189 of 204 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Insufficient fill water, dishes not getting clean (valve diaphram had ruptured)
1. Remove lower cover skirt.
2. Shut of water at undersink valve.
3. Unplug power cord or turn off circuit breaker.
4. Disconnect water supply line from fill valve.
5. Unplug the electrical connector from the valve.
6. Remove the 2 valve mounting bracket screws.
7. With loose valve in hand, rotate to gain access to allow release of outlet hose clamp for hose removal.
8. Remove brass fitting from old valve and install on new valve. Use teflon tape on the pipe threads only.

Install new valve by reversing the procedure.
Parts Used:
Water Inlet Valve
  • Don from Mount Vernon, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Wrench set
71 of 77 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Basket was lost
Opened package from Parts Select.
Removed Silverware basket from package.
Opened Dishwasher.
Inserted Silverware Basket in rack.
Closed Dishwasher.
Discarded shipping package.
Told wife I fixed Dishwasher.
Sat down & had a beer.
Parts Used:
Silverware Basket (Grey)
  • Joseph from Elmendorf, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
49 of 52 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!