Quick Question!

Have you ever purchased from PartSelect.com before?

Models > GLT3657RQ05

GLT3657RQ05 Whirlpool Cooktop - Overview

Get Parts and Repair Help for GLT3657RQ05

If you know the cooktop repair part you need, you can browse the list of all parts on the GLT3657RQ05, or you can search by name or part description. You can also find your part by where it is located on the GLT3657RQ05 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Manuals & Care Guides for GLT3657RQ05

Click to download
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$4.52

Knob Skirt - Black

The knob skirt or grommet on your range goes around the knob, forming a buffer between it and the range surface. If your knob skirt is damaged, you should consider replacing it. Th...

$4.12

Torx Screw

7-18 x 3/4" - sold individually.

$3.02

Screw, Igniter

This screw is sold individually.

$4.79

Screw

Sold individually.

$4.63

Knob Skirt

This white knob skirt is located between the glass top and the control knobs of your stove top. The skirt has an outside diameter of approximately 2 inches. The most common reasons...

$5.10

Screw, 8/18 x 3/8

This screw is sold individually.

$14.31

Surface Ignitor

Also known as Spark Electrode. This part helps your burner ignite and produce flame.

$27.81

Burner Head - 12K

This part distributes flame evenly to your cookware.

$3.02

Screw

This screw is sold individually.

$66.63

Igniter Switches with Harness

This part includes 5 ignition switches and the wire harness. You can not purchase these separately.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Igniter problem on one gas burner

  • Customer: Roland from Houston, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 14 of 16 people found this instruction helpful
I had to remove the two separate components of the gas burner unit, each had two screws. I lifted then tilted the lower portion of the burner unit to allow access to the underside of the igniter. I removed the wire and then with an offset screwdriver I removed the single screw that held the igniter in place. I reversed the steps to install the replacement,... read more

I had a faulty wiring on the igniter switches.

  • Customer: Raymundo from Cerritos, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 10 of 14 people found this instruction helpful
replaced the set of igniter switches I order from Partselect .com. read more

Replace Gas Cooktop bad surface Igniter

  • Customer: Charles from Williamsburg, VA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 3 of 4 people found this instruction helpful
1. Turn off Gas at valve under cooktop. Unplug electric to igniters. 2. Remove all control knobs. 3. Remove grates and burner covers. 4. Remove screws from each burner head (10 screws) 5. lift and remove cooktop cover. 6. Reach under cabinet and push up main cooktop body (about 4 or 5 inches) and BLOCK. 7. AT FRONT OF COOKTOP REMOVE 2 philips screws holdi... read more