Quick Question!

Have you ever purchased from PartSelect.com before?

Models > GLT3057RB01

GLT3057RB01 Whirlpool Cooktop - Overview

Get Parts and Repair Help for GLT3057RB01

If you know the cooktop repair part you need, you can browse the list of all parts on the GLT3057RB01, or you can search by name or part description. You can also find your part by where it is located on the GLT3057RB01 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$4.12

Torx Screw

7-18 x 3/4" - sold individually.

$4.52

Knob Skirt - Black

The knob skirt or grommet on your range goes around the knob, forming a buffer between it and the range surface. If your knob skirt is damaged, you should consider replacing it. This product is approximately 2 inches in diameter. This part is made of black plastic, and is sold individually. Many of our customers have described this repair as very easy. To complete the repair, simply remove the burner knob and the old knob skirt, replace it with the new knob skirt and re-attach the burner knob. The product contains four locking tabs that should snap into place easily.

$4.89

SCREW

Sold individually.

$4.79

Screw

Sold individually.

$4.63

Knob Skirt

This white knob skirt is located between the glass top and the control knobs of your stove top. The skirt has an outside diameter of approximately 2 inches. The most common reasons...

$27.54

Burner Head - 12K

This part distributes flame evenly to your cookware.

$2.90

Screw

This screw is sold individually.

$22.61

Burner Head - 6K

This is the Right Rear Burner Head.

$16.94

Burner Knob

Sold individually. This knob accepts a D-shaped shaft.

$91.09

Spark Module

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

Common Symptoms of the GLT3057RB01

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Top burners would not light. No "clicking" .

  • Customer: Carolyn from Bellingham, MA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 17 of 24 people found this instruction helpful
My husband and I replaced the igniter module, following directions we found online. We removed the old one, replaced it with the new one, and thankfully everything is working great! read more

gas burners would not automatically light when gas turned on

  • Customer: MICHAEL from LONGVIEW, TX
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 10 of 13 people found this instruction helpful
I went online and discovered the repair method and schematic of the range. I removed the spark module after first removing the upper rear panel cover and replaced with the new part module ordered from your company and now the spark module operates all the gas elements when they are turned on thus lighting the gas burners. My mother in law was thrilled, as sh... read more

Spark Module malfunction, won't spark

  • Customer: Darrel from Kewaunee, WI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 7 of 13 people found this instruction helpful
Removed back upper cover, unscrewed retaining screw from module. As noted in a comment from another do-it-yourselfer, I replaced screw with a longer one and reinstalled module. Note that the replacement part is not exactly the same as the old one(the wires are located differently), I noted the wire color codes with the slot number and reinstalled them in t... read more