Models > GLS3074VS02

GLS3074VS02 Whirlpool Cooktop - Overview

Get Parts and Repair Help for GLS3074VS02

If you know the cooktop repair part you need, you can browse the list of all parts on the GLS3074VS02, or you can search by name or part description. You can also find your part by where it is located on the GLS3074VS02 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$6.14

Burner Grate Pads - Kit of 5

These pads go on the bottom of your gas cooktop grates to prevent them from moving and scratching the top of your appliance.

$2.70

Torx Screw

7-18 x 3/4" - sold individually.

$2.70

Igniter Screw

This screw is sold individually.

$3.83

SCREW

$17.88

KNOB

$17.57

Surface Igniter

Also known as Spark Electrode. This part helps your burner ignite and produce flame.

$95.93

Double Burner Grate

$32.03

Burner Cap - Left Rear/Right Front - Coal Matte Black

$38.12

Natural Gas To Liquid Propane Gas Conversion Kit

$70.13

Spark Module

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

several grate pads fell out/lost /broke during cleaning

  • Customer: Sabrina from Mooresville NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 28 of 28 people found this instruction helpful
The only real issue was locating the proper adhesive to ensure that the new pads would not fall out. The small insert paper slip in the package noted that a RTV adhesive should be used. After much searching at the home improvement super store, I learned it would be found at an auto supply store. It is black, and is for high temp use. It is available in a sma... read more

Top burners would not light. No "clicking" .

  • Customer: Carolyn from Bellingham MA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 11 of 14 people found this instruction helpful
My husband and I replaced the igniter module, following directions we found online. We removed the old one, replaced it with the new one, and thankfully everything is working great! read more

Rubber pads on bottom of grate broke off, grate was scratching stainless steel top

  • Customer: Melissa from The Woodlands TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 13 of 20 people found this instruction helpful
I just put the grate pads in the bottom of the grate. The repair was a snap. read more