Quick Question!

Have you ever purchased from PartSelect.com before?

Models > GLS3074VS00

GLS3074VS00 Whirlpool Cooktop - Overview

Get Parts and Repair Help for GLS3074VS00

If you know the cooktop repair part you need, you can browse the list of all parts on the GLS3074VS00, or you can search by name or part description. You can also find your part by where it is located on the GLS3074VS00 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$5.15

SCREW

Sold individually.

Order within the next 6 hrs and your part ships today!
$28.30

Cooktop Mounting Bracket & Screw

Order within the next 6 hrs and your part ships today!
$36.75

Cord, Power

Order within the next 6 hrs and your part ships today!
$20.97

Bracket, Mounting

Order within the next 6 hrs and your part ships today!
$64.20

HARNS-WIRE

Order within the next 6 hrs and your part ships today!
$6.04

SHIELD-HT

Order within the next 6 hrs and your part ships today!
$29.09

Orifice (LF)

$89.04

Valve, Gas Burner (Orange)

Order within the next 6 hrs and your part ships today!
$24.31

WIRE

Order within the next 6 hrs and your part ships today!
$162.36

Cooktop

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Top burners would not light. No "clicking" .

  • Customer: Carolyn from Bellingham, MA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 17 of 22 people found this instruction helpful
My husband and I replaced the igniter module, following directions we found online. We removed the old one, replaced it with the new one, and thankfully everything is working great! read more

Igniter problem on one gas burner

  • Customer: Roland from Houston, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 12 of 14 people found this instruction helpful
I had to remove the two separate components of the gas burner unit, each had two screws. I lifted then tilted the lower portion of the burner unit to allow access to the underside of the igniter. I removed the wire and then with an offset screwdriver I removed the single screw that held the igniter in place. I reversed the steps to install the replacement,... read more

gas burners would not automatically light when gas turned on

  • Customer: MICHAEL from LONGVIEW, TX
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 10 of 12 people found this instruction helpful
I went online and discovered the repair method and schematic of the range. I removed the spark module after first removing the upper rear panel cover and replaced with the new part module ordered from your company and now the spark module operates all the gas elements when they are turned on thus lighting the gas burners. My mother in law was thrilled, as sh... read more