Models > GLGC36S8KSA

GLGC36S8KSA Frigidaire Cooktop - Overview

Get Parts and Repair Help for GLGC36S8KSA

If you know the cooktop repair part you need, you can browse the list of all parts on the GLGC36S8KSA, or you can search by name or part description. You can also find your part by where it is located on the GLGC36S8KSA by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the GLGC36S8KSA [Viewing 4 of 4]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$5.62

SCREW

$37.39

Spark Module

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

$62.66

Drip Pan - White

This pan is actually WHITE. It is not black as the photo suggests. This pan is sold individually.

$24.57

Burner Igniter

Also known as spark electrode. This part helps your burner ignite and produce flame.

$18.64

Bushing

$77.45

LP Gas Conversion Kit

$152.00

GRATE

$137.62

Gas Pressure Regulator

***No Conversion Kit Required - Adjust On Appliance*** This valve automatically cuts off the flow of a liquid or gas when it reaches a certain pressure.

$64.95

PAN

$59.00

Burner Cap - 9.5K

Sold individually. Gray in color.

Common Symptoms of the GLGC36S8KSA [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

burner ingnighter would not lite burner

  • Customer: Wayne from Palestine IL
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers, Wrench(Adjustable)
  • 13 of 44 people found this instruction helpful
Replaced the ingintion module, still did not work, replaced the burner complete with new ingiter , it now works but another one quit . the front right one has 5 ohms resistance ,replaced with new one with 0 ohms, the back left has 2 ohms resistance and now it does not work , will need to replace that burner allso. too bad you can't buy just the spark module ... read more

"hot" indicator light on glass cook top burned out

  • Customer: Kathleen from Middlebury VT
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
After removing pots / pans in cabinet below cook top and turning off the power, I was able to remove the panel held by 2 screws. Pulling the old light out was just a little difficult as it came in pieces. New one popped right in, hooked up terminals, replaced the panel and that was it !! read more

Two of theTop gas burners would not spark

  • Customer: Robert R from Lewistown PA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Took 6 screws out holding the top on from the sides. Lifted the top front, popped out the spark module, Took 6wires off & reversed the processed to install the new one. I was really amazed when I ordered it Wednesday and it arrived on Friday. Believe me I bookmarked this site. read more