Models > GLGC36S8CQA

GLGC36S8CQA Frigidaire Cooktop - Overview

Get Parts and Repair Help for GLGC36S8CQA

If you know the cooktop repair part you need, you can browse the list of all parts on the GLGC36S8CQA, or you can search by name or part description. You can also find your part by where it is located on the GLGC36S8CQA by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the GLGC36S8CQA [Viewing 4 of 4]

$31.02

Igniter Switch

When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.

$24.57

Burner Igniter

Also known as spark electrode. This part helps your burner ignite and produce flame.

$137.62

Gas Pressure Regulator

***No Conversion Kit Required - Adjust On Appliance*** This valve automatically cuts off the flow of a liquid or gas when it reaches a certain pressure.

$31.05

SUPPORT

$7.04

SCREW

$73.25

Spark Module

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

$51.16

Burner Pan Gasket

$32.21

BRACKET

$18.64

Bushing

$5.99

SCREW

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

gas ignitor continued to run after turned on or off

  • Customer: Duff from Buena Vista CO
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 7 of 8 people found this instruction helpful
Removed all of the grates, control knobs and gas diffusers. Unscrew the drip pans, two on each pan, which attach the pans to the gas supply. Raised the drip pans from the top and unplugged the ignitors from all pans. Remove the top and the rubber deflector over the ignitor switch. The ignitor switch snaps off and on. One of the seals under the drip pan was b... read more