Models
>
GLGC30S9EQA
GLGC30S9EQA Frigidaire Cooktop - Overview
Sections of the GLGC30S9EQA
[Viewing 4 of 4]
Manuals & Care Guides for GLGC30S9EQA
Click to downloadInstall
Installation Instructions
(1.62MB)
Install
Installation Instructions
(6.42MB)
Manual
Owner's Manuals
(0.59MB)
Manual
Owner's Manuals
(5.63MB)
Wiring
Wiring Diagram
(0.09MB)
Keep searches simple, eg. "belt" or "pump".
Medium Burner - 9.5K
PartSelect #: PS439737
Manufacturer #: 316212400
The surface burner head is used for ranges and ovens, and is located on the cooktop, where the flames go up. The surface burner spreads the gas through holes to create an even flame throughout the ent...
$27.05
In Stock
Igniter/Orifice Mounting Screw
PartSelect #: PS440022
Manufacturer #: 316240600
This part is the igniter/orifice mounting screw for your cooktop or range. It is approximately ½ an inch in length and is made of metal. The mounting screw connects the orifice to the cooktop. If the ...
$12.23
In Stock
Spark Module
PartSelect #: PS2350722
Manufacturer #: 316135702
This spark module or range spark module, is used in ranges and ovens. The spark module monitors and controls the spark to ignite the surface burner in a range. It does this by sending a certain amount...
$94.31
In Stock
Burner Head
PartSelect #: PS2350723
Manufacturer #: 316206401
This burner head is used on gas stovetops. It is located underneath the burner cap.
$56.75
In Stock
Natural Gas Top Burner Orifice - 5,000 btu
PartSelect #: PS439994
Manufacturer #: 316237903
$63.91
On Order
Questions And Answers for GLGC30S9EQA
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the GLGC30S9EQA
[Viewing 2 of 2]Will Not Start
Fixed by
these parts
these parts
Show All
Gas igniter glows, but will not light
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The burner would not light by itself, and the flame was lopsided.
The repair was nothing, but the diagnosis was a bit tricky. After carefully looking at the burner head, (cast aluminum) I pretty much figured out that the 4 small cast aluminum bumps that keep the burner cap positioned up in the air the correct amount to allow gas to flow under the cap, were worn down, preventing the gas from exiting pro
... Read more
perly by the igniter. My guess was correct. The new burner head solved all my problems. I love Parts Select for the ease of finding the correct parts and how fast they ship their orders. Great company, great service. Keep up the good work
Read less
Parts Used:
-
Roland from Auburn, ME
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
25 of 28 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken ceramic burner element
Simple: remove the element by hand and replace new one.
I can't believe how quickly I received my new part -literally next day.
I can't believe how quickly I received my new part -literally next day.
Parts Used:
-
Phillip from Saint Simons Island, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
9 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top burners were not lighting without a match
Was easy...I pulled oven out from the wall so I could get to the back.i used a nut driver to remove small silver cover.matched up wires to the never module and re installed.pluged oven back in and burners lit perfectly
Parts Used:
-
Earl from ALLIANCE, OH
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!